Functioning
The receiver is actuated by means of a current pulse triggered by pushing any bell push connected to the relay. The receiver is deactivated by another pulse or after a preset time. Long press, lasting a minimum of 2 seconds, press the button will attach the contact permanently in continuous lighting mode until another pulse has been sent to deactivate the relay.
The relay does not “memorize” the position of the relay contact, i.e. in case of supply voltage decay and the subsequent return of supply voltage, the relay contact will be set in the off position. Such a solution prevents the automatic actuation of the receivers controlled that might occur without proper supervision after a long-lasting decay of supply voltage.
GTIN: | 5908312594093 |
HAN: | BIS-413-24V |
Category: | Impulse switch relay |
supply voltage: | 12V DC |
switching current (A): | 16 A |
Contact Form: | 1 CO (SPDT / 1 Form C) |
operating temperatur (°C): | -25 / +50 °C |
Manufacturer series: | BIS Series - F&F |
protection category: | IP20 |
time relay functions: | 1÷12 min. |
high inrush: | no |
Functions: | with time switch, ON / OFF |
Power consumption: | 0.7W |
Assembly: | DIN-Rail |
product type: | Bistable relay |
Cooperation with illuminated buttons: | NO |
Tightening torque: | 0.4 Nm |
Terminal: | pluggable terminal blocks 2.5 mm² |
Separation of the contact: | YES |
Number of channels: | 1 Channel |
Delay of operation: | 0,1 ÷ 0,2 s |
Status memory after power failure: | NO |
Dedicated central control inputs: | NO |
Control pulse current: | less than 1 mA |
Item weight: | 0,1500 kg |
Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl