Functioning
Electronic bistable pulse relay BIS-413M-LED allows switching on or off the lighting or other device from several different points by parallel connected, momentary (bell) control switches.
The receiver is switched on after a current pulse caused by pressing any momentary (bell) button connected to the relay. The receiver is turned off after the next impulse or automatically after the set off time. A longer pressing of the momentary button, lasting at least 2 seconds, turns on the relay permanently. The relay will be turned off only after pressing the momentary button again (or after a power supply failure). The supply voltage is indicated by the illumination of the green LED marked as U. Switching the relay on and the countdown to automatic switch-off is signalled by the blinking of the red LED. Permanent switching of the relay is signalled by continuous lighting of the red LED.
The relay has the feature of the so-called „memory” of the contact position, which means when the power supply is switched back on, the relay will be restored to the state it was in when the power supply was switched off.
The "LED" version of the relay is equipped with a contact designed to cooperate with receivers with high starting current, such as: LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
BIS-413M-LED 24V is not compatible with backlit buttons.
Table for loads supplied with 230 V AC
GTIN: | 5902431671796 |
HAN: | BIS-413M-LED-24V |
Category: | Impulse switch relay |
supply voltage: | 24V DC |
switching current (A): | 16 A |
Contact Form: | 1 Schliesser |
operating temperatur (°C): | -25 / +50 °C |
Manufacturer series: | BIS Series - F&F |
protection category: | IP20 |
time relay functions: | 1÷12 min. |
high inrush: | 120A / 20 ms |
Functions: | ON / OFF, with time switch |
Power consumption: | 0.8W |
Assembly: | DIN-Rail |
product type: | Bistable relay |
Cooperation with illuminated buttons: | YES |
Tightening torque: | 0.4 Nm |
Terminal: | pluggable terminal blocks 2.5 mm² |
Separation of the contact: | YES |
Number of channels: | 1 Channel |
Delay of operation: | 0,1 ÷ 0,2 s |
Status memory after power failure: | YES |
Dedicated central control inputs: | NO |
Control pulse current: | less than 5 mA |
Item weight: | 0,1500 kg |
Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl