Functioning
Operation mode:
*LAGGED ACTIVATION (IR)
After the power voltage is supplied, the contact remains in position 11-10 (and 8-7 for PCU-510) and the timing of the preset value t is commenced. After the preset time t has been counted down, the contact is shifted to position 11-12 (and 8-9 for
PCU-510). The working sequence of the relay may be repeated after turning the power supply off and on.
*LAGGED DEACTIVATION (IA)
Until the relay is activated, the contact remains in the 11-10 (and 8-7 for PCU-510) position. After the power voltage is supplied, contact is shifted to position 11-12 (and 8-9 for PCU-510) and the countdown of the preset value t is commenced. After the preset time t has been counted down, contact returns to position 11-10 (and 8-7 for PCU-510). The working sequence of the relay may be repeated after turning the power supply off and on.
*LAGGED ACTIVATION - CYCLIC (CR)
The LA operational mode is triggered in equal interruption/work cycles according to the preset time values.
*LAGGED DEACTIVATION - CYCLIC (CA)
The LD operational mode is triggered in equal interruption/work cycles according to the preset time values.
Attention!
* Setting the time range knob regulator in the:
ON - position with power supply activated results in the permanent closure of the contact in position 11-12 (and 8-9 for PCU-510).
OFF - position (power supply activated) causes the contact to be permanently closed in the 11-10 (and 8-7 for PCU-510) position.
* With the power supply on, the system does not respond to time range setting modifications.
* The newly set time range is active after the power supply has been turned off and on.
* With the power supply on, it is possible to regulate the preset time freely within the selected time range.
GTIN: | 5908312595410 |
HAN: | PCU-511 |
Category: | Time Relays |
supply voltage: | 230V AC |
switching current (A): | 8 A |
Contact Form: | 1 CO (SPDT / 1 Form C) |
operating temperatur (°C): | -20 / +50 °C |
protection category: | IP20 |
time relay functions: | Esa - ON and OFF delay, B (FiF) - cyclical operation |
Assembly: | DIN-Rail |
product type: | Timing-relay |
Tightening torque: | 0.4 Nm |
Terminal: | pluggable terminal blocks 2.5 mm² |
Separation of the contact: | YES |
Dimensions: | 1 module (17.5 mm) |
tripping delay: | 50 ms |
switching time (adjustable): | 0.1 s ÷ 576 h |
executive element: | relay |
Signal LED color: | red, green |
Item weight: | 0,0700 kg |
Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl