Filter By

Price

Price

  • €17.00 - €20.00

Coil voltage

Coil voltage

switching current (A)

switching current (A)

New products

New products

LED and lighting relays

LED and lighting relays

Current surge switches or current surge relays for LED and lighting technology require high inrush currents, predominantly between 30A and 120A, since the inrush current of lighting equipment is up to 15 times higher than the current consumed in the operating state. To be able to generate these "current peaks" when switching on, so-called "inrush" relays are used. Also in building services and control cabinets, special installation relays with high inrush currents are used to control lighting. Another feature of such special installation relays is the so-called "bistability". This means that the relay does NOT have to be permanently "under voltage", but that only a "current surge" is needed to switch. The relay then holds its position. To switch the relay again, only a new short current signal is necessary. If you have any questions, we are always happy to help!

.

Active filters

  • switching current (A): 8 A
  • RPB-2Z-A230 - Stromstoßschalter 230V AC 2 Schliesser 8A

    RPB-2Z-A230 - bistable impulse relay 230V AC 2 N/O 8A

    €19.50
    102727
    • Impulse switch
    • 230V AC 8A
    • 2 Normally open contacts
    • LED and lighting control
    Quantity Unit price
    1 €19.50
    10 €18.53
    20 €17.94
    shipping appr. 5 - 7 Days
    20 Items
  • RPB-2Z-U24 - Bistabiles Stromstoßrelais 24V AC/DC 2 Schliesser LED Steuerung

    RPB-2Z-U24 - Bistabile impulse relay 24V AC/DC 2 N/O 8A

    €19.90
    102726
    • Impulse switch
    • 24V AC/DC 8A
    • 2 Normally open contacts
    • LED and lighting control
    Quantity Unit price
    1 €19.90
    10 €18.91
    20 €18.31
    shipping appr. 5 - 7 Days
    54 Items