12V to 240V AC/DC

-5 / +55 °C

1 pole

10 A

16 A

8 A

10 A / 24 VDC

16 A / 24 VDC

8 A / 24 VDC

10 A / 250 VAC

16 A / 250 VAC

8 A / 250 VAC

250 VAC

300 VAC / 300 VDC

3PST-NO (3 Form A)

DPST-NO (2 Form A)

SPDT (1 Form C)

A - Switch-off delay after power failure

AUTO - ON for time interval by voltage/contact

B - cyclical operation controlled by contact

Bi - pulse first, symmetrical cyclical

Bp - pause first, symmetrical cyclical

E - ON delay

E(R) - ON delay with the Reset function

E(S) - ON delay, with time measurement stopped with contact S

ER - ON delay and OFF delay with control contact S

Es - ON delay with the control contact S

Esa - ON and OFF delay

Esp - ON delay - one cycle, with closing of the control contact S

Est - ON delay with closing of the control contact S

EWa - OFF delay and breaking time delay with opening of the control contact S

EWf - ON delay and OFF delay with the control contact S

EWs - ON delay and ON for the set time with closing of the control contact S

EWu - ON delay for the set interval

nWa - ON for a time, when voltage is off.

nWs - latching ON delay

nWu - ON for time, by ON supply voltage

nWuWa - single shot leading + trailing edge

ON / OFF - permanent switching

Pi - Cyclical operation pulse first

Pi(S) - Cyclical operation pulse first

Pp - Cyclical operation pause first

Pp(S) - Cyclical operation pause first

R - OFF delay through control contact

R - OFF delay with the control contact S

T - generation of the 0,5 s pulse

Wa - ON for intervall by opening contact

Wi - Time interval controlled by voltage

Ws - single shot by closing contact

WsWa - ON for the set intervals with the control contact S

Wt - Monitoring of the sequence of pulses

Wu - ON for the set interval

Wu(R) - ON for the set interval with the Reset function

Wu(S) - ON for the set interval, with time measurement stopped with contact S closing

AgSnO2

Bistable relay

Installationrelay

Timing-relay

Cabinet

DIN-Rail

IP20

MT - Relpol

RPB - Relpol

RPI-Z Series - Relpol