STR-2 roller shutter control for flush-mounted box 60mm

SKU: 103146

The roller blind controller STR-2 is designed for controlling roller blinds (up and down movement) or other devices (for example, gates) that are driven by a single-phase AC electric motor and operated by means of momentary switches. One button type

STR-2 roller shutter control for flush-mounted box 60mm

Pre-order possible
Delivery time: 8 - 10 Workdays (Other countries)

26,95 €

incl. 19% VAT , plus

Quantity	Single price
1	26,95 €*
5	25,61 €*
10	24,80 €*

Worldwide shipping

ask our friendly support Team

NEW! Intelligent article search system.

When entering the searched manufacturer series, alternative article series are displayed.

NEW! Payment by invoice

Pay after receive the goods (for German and Austrian Business Customers only).

The controller can operate as an independent unit (designated for opening/closing one roller blind) as well as the controllers can be combined into groups that enable the central controlling of many roller blinds.

Functioning
Supplied the relay is to sigal by shine of green LED U. The roller blind motor is activated by the momentary switching of a current pulse (L or N) to one of the control inputs. The motor is activated at a time programmed previously by the user. The activation time programmed enables the complete lifting or lowering of the roller blind. Also, there is a possibility of stopping the rolled blind activated at a level selected by the user (non-complete opening or closing of the roller blind).

Control inputs of relay
Local control - buttons connected to joint 6 and control one roller blind
-upwards (opening); - downwards (closing).
Pressing the local control push-button activates the movement of the roller blind in a selected direction. If the roller blind is already moving, pressing the local control push-button will stop the roller blind.
Central control - a common group of push-buttons which are connect to joint 7 and 8 for many controllers (minimum two controllers) that controls all roller blinds included in the central control system
- all upwards; - all downwards.
Pressing the central control push-button activates the movement of the roller blinds in a selected direction. If one of the roller blinds is already moving in the same direction, its movement will be continued. If one of the roller blinds is moving in the opposite direction, this roller blind will be first stopped and then its movement will be activated in the direction in accordance with the command sent to the central input.

ATTENTION!
The central control enables only activating the movement of the roller blinds in a selected direction. The roller blind will be stopped after the programmed movement time or when any of the local control push-buttons is pressed.

SKU: 103146

Pre-order possible

supply voltage:	230V AC
operating temperatur (°C):	-25 / +50 °C
protection category:	IP20
Power consumption:	1W
Terminal:	4×DY 1mm²; length:10 cm 4×DY 1.5mm²; length:10 cm
Assembly:	flush-mounted box Ø60
executive element:	relay
Motor voltage:	230V AC
Central control:	2 buttons
Switch-on time - programmable:	0 s to 10 min
Control pulse current:	1 mA
Dimensions:	Ø55 mm, h 13 mm
Item weight:	0,1500 kg