Installation and building technology
Items 1 - 30 of 48
- SKU:
- 102917
Current 63 A. 24 V AC/DC voltage. Power AC1 24 kW. Power AC3 8.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102929
Programmable control timer is used to time control the devices in home or industrial automation systems according to an individual time program set by the user.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
- SKU:
- 103035
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 102894
Current 25 A. Voltage 24 V AC. Power AC1 4 kW. Power AC3 1.3 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102836
The staircase light timer (time switch) is used to leave the lighting in hallways, stairwells or other places on for a certain time and then switch them off automatically. 230V AC 12A
- SKU:
- 102856
The BIS-412P electronic bistable pulse relay is designed for group operation. A single relay allows the controlled receiver to be switched on and off after each current pulse caused by pressing the momentary (bell) button of the local control connected to this relay.
- SKU:
- 102936
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Programmable logic controller CPU.
Programmable logic controller CPU.
- SKU:
- 102910
Current 63 A. Voltage 230 V AC. Power AC1 24 kW. Power AC3 8.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102987
Output voltage 12 V. Power 60 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102849
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102824
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. On rail 35mm. 16A.
- SKU:
- 102915
Current 25 A. Voltage 24 V DC. Power AC1 4 kW. Power AC3 1.3 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102914
Current 25 A. Voltage 24 V DC. Power AC1 4 kW. Power AC3 1.3 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102919
Modular contactor with manual control
Rated operating current 25 A.
Rated operating voltage 250 V AC.
Electromagnetic contactors in modular enclosures for direct mounting on TH-35 mm rail.
Rated operating current 25 A.
Rated operating voltage 250 V AC.
Electromagnetic contactors in modular enclosures for direct mounting on TH-35 mm rail.
- SKU:
- 102920
Modular contactor with manual control
Rated operating current 40 A.
Rated operating voltage 250 V AC.
Electromagnetic contactors in modular enclosures for direct mounting on TH-35 mm rail.
Rated operating current 40 A.
Rated operating voltage 250 V AC.
Electromagnetic contactors in modular enclosures for direct mounting on TH-35 mm rail.
- SKU:
- 102909
Current 63 A. 24 V AC voltage. Power AC1 24 kW. Power AC3 8.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 103041
Motion sensor is used for automatic switch on lighting in the event of a person or other object in such areas as hallways, courtyards, approach and access roads, garages, etc. Surface mounting. Protection level IP 44.
- SKU:
- 103038
The motion sensor is designed for automatic, scheduled lighting activation if a person or other object appears in places such as corridors, courtyards, approaches and driveways, garages, etc. In flush mounted Ø60.
- SKU:
- 103023
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 103029
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 103034
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 102996
A single LED. Color blue. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103011
Three phases. Three LEDs. Color green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103016
Two states. Two LEDs: green, red. Voltage range 130-260 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103058
The motion detector is used for automatic, temporary lighting attach if a person or another object appears in detector’s range in places such as hallways, courtyards, approaches and driveways, garages, etc. With presence detector function.
- SKU:
- 102938
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Expansion module of analog-digital inputs/outputs.
Expansion module of analog-digital inputs/outputs.
- SKU:
- 102957
Single-phase. Maximum current 45A.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
- SKU:
- 102983
Impulse power supply. Output voltage 24 V. Power 50 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
Items 1 - 30 of 48