115V AC

-20 / +50 °C

-20 / +70 °C

-40 / +70 °C

-5 / +55 °C

0.5 Nm

1 Channel

2 channel

3 Channel

4 Channel

2 Channel (bidirectional)

1 Phase

3 Phase

2 Phase

1 pole

3 pole

10 A

16 A

25 A

40 A

8 A

48 A

10 A / 24 VDC

16 A / 24 VDC

8 A / 24 VDC

10 A / 250 VAC

16 A / 250 VAC

8 A / 250 VAC

240 VAC

250 VAC

250 VAC / 30 VDC

300 VAC / 300 VDC

3PDT (3 Form C)

3PST-NO (3 Form A)

DPDT (2 Form C)

DPST-NO (2 Form A)

SPDT (1 Form C)

SPST-NO (1 Form A)

480

A - Switch-off delay after power failure

AUTO - ON for time interval by voltage/contact

B - cyclical operation controlled by contact

Bi - pulse first, symmetrical cyclical

Bp - pause first, symmetrical cyclical

E - ON delay

E(R) - ON delay with the Reset function

E(S) - ON delay, with time measurement stopped with contact S

ER - ON delay and OFF delay with control contact S

Es - ON delay with the control contact S

Esa - ON and OFF delay

Esp - ON delay - one cycle, with closing of the control contact S

Est - ON delay with closing of the control contact S

EWa - OFF delay and breaking time delay with opening of the control contact S

EWf - ON delay and OFF delay with the control contact S

EWs - ON delay and ON for the set time with closing of the control contact S

EWu - ON delay for the set interval

nWa - ON for a time, when voltage is off.

nWs - latching ON delay

nWu - ON for time, by ON supply voltage

nWuWa - single shot leading + trailing edge

ON / OFF - permanent switching

Pi - Cyclical operation pulse first

Pi(S) - Cyclical operation pulse first

Pp - Cyclical operation pause first

Pp(S) - Cyclical operation pause first

R - OFF delay through control contact

R - OFF delay with the control contact S

T - generation of the 0,5 s pulse

Wa - ON for intervall by opening contact

Wi - Time interval controlled by voltage

Ws - single shot by closing contact

WsWa - ON for the set intervals with the control contact S

Wt - Monitoring of the sequence of pulses

Wu - ON for the set interval

Wu(R) - ON for the set interval with the Reset function

Wu(S) - ON for the set interval, with time measurement stopped with contact S closing

AgSnO2

Bistable relay

Installation relay - Smart conect

Installationrelay

Motor Control - Smart Home

programmable control timer

Timing-relay

Bluetooth

WiFi

LAN

IP20

MT - Relpol

PCZ Series - F&F

RPB - Relpol

RPI-P Series - Relpol

RPI-Z Series - Relpol

Shelly PRO-Series

pluggable terminal blocks 4.0 mm²

1s

6 years

transistor

3W