12V AC

-20 / +70 °C

-25 / +50 °C

-40 / +70 °C

-5 / +55 °C

0.56W

1W

1 CO (SPDT / 1 Form C)

1 NO (SPST / 1 Form A)

2 CO (DPDT / 2 Form C)

2 NO (DPST / 2 Form A)

3 CO (3PDT / 3 Form C)

3 NO (3PST / 3 Form A)

4 CO (4PDT / 4 Form C)

4 NO (4PST / 4 Form A)

2 CO + 2 NO

2 x 2 CO / 4 relay output

2 x 1 NO TRIAC

1 pole

2 pole

3 pole

4 pole

10 A

16 A

2 A

6 A

8 A

10 A / 24 VDC

16 A / 24 VDC

8 A / 24 VDC

10 A / 250 VAC

16 A / 250 VAC

8 A / 250 VAC

6 A / 230V AC

2 A / 230V AC

115V AC

12V to 240V AC/DC

12V AC

12V DC

18V DC

230V AC

230V DC

24V AC

24V DC

30V DC

48V DC

50V DC

60V DC

250 V AC

250 VAC

250 VAC / 24 VDC

300 VAC

300 VAC / 300 VDC

7 Lx

A - Switch-off delay after power failure

AUTO - ON for time interval by voltage/contact

B - cyclical operation controlled by contact

Bi - pulse first, symmetrical cyclical

Bp - pause first, symmetrical cyclical

E - ON delay

E(R) - ON delay with the Reset function

E(S) - ON delay, with time measurement stopped with contact S

ER - ON delay and OFF delay with control contact S

Es - ON delay with the control contact S

Esa - ON and OFF delay

Esp - ON delay - one cycle, with closing of the control contact S

Est - ON delay with closing of the control contact S

EWa - OFF delay and breaking time delay with opening of the control contact S

EWf - ON delay and OFF delay with the control contact S

EWs - ON delay and ON for the set time with closing of the control contact S

EWu - ON delay for the set interval

Ii + Ip - Cyclical operation in two independent intervals T1 and T2

nWa - ON for a time, when voltage is off.

nWs - latching ON delay

nWu - ON for time, by ON supply voltage

nWuWa - single shot leading + trailing edge

ON / OFF - permanent switching

Pi - Cyclical operation pulse first

Pi(S) - Cyclical operation pulse first

Pp - Cyclical operation pause first

Pp(S) - Cyclical operation pause first

R - OFF delay through control contact

R - OFF delay with the control contact S

Ra - OFF delay with the control contact S, without the interval T extension

T - generation of the 0,5 s pulse

Wa - ON for intervall by opening contact

Wi - Time interval controlled by voltage

Ws - single shot by closing contact

WsWa - ON for the set intervals with the control contact S

Wt - Monitoring of the sequence of pulses

Wu - ON for the set interval

Wu(R) - ON for the set interval with the Reset function

Wu(S) - ON for the set interval, with time measurement stopped with contact S closing

Wst - ON for the set interval by closing the control contact S, with extension of the interval T

Esf - ON delay with the control contact S, without the interval T extension

SD - Star-Delta start-up

Bp(S) - Symmetrical cyclical operation pause first, with interval T measurement stopped for the time the S contact is switched on

Bi(S) - Symmetrical cyclical operation pulse first, with interval T measurement stopped for the time the S contact is switched on

Esa(R) - ON and OFF delay controlled with on and off of the S contact with the Reset function

AgSnO2

Bistable relay

Installationrelay

Timing-relay

Cabinet

DIN-Rail

on Wall

EIR series - elovolt

MT - Relpol

R4N - Relpol

RM87N - Relpol

RPB - Relpol

RPC - Relpol

RPI-P Series - Relpol

RPI-Z Series - Relpol

fluorescent lamp

halogen lamp

LED lamp

IP20

2 ÷ 1000 Lx

4.000 V AC