Functioning
The receiver is followed by current pulse triggered by pressing any (bell) connected to the relay. Turning off the receiver will be the next pulse. The relay does not have a "memory" of the contact position, ie. in the case of power failure and the subsequent return, contact the relay will be set in the off. This prevents the automatic switching of loads without supervision after a prolonged power failure.
Attention!
The BIS-402 not compatible with bell pushes equipped with fluorescent lamps.
Power table
The above data are indicative and will depend to a large extent on the design of a specific receiver (especially for LED bulbs, energy saving lamps, electronic transformers and pulse power supplies), switching frequency and working conditions.
GTIN: | 5908312594062 |
HAN: | BIS-402 |
Category: | Impulse switch relay |
supply voltage: | 230V AC |
switching current (A): | 10 A |
Contact Form: | 1 CO (SPDT / 1 Form C) |
Manufacturer series: | BIS Series - F&F |
protection category: | IP20 |
high inrush: | no |
Power consumption: | 0.4W |
product type: | Bistable relay |
Tightening torque: | 0.4 Nm |
Terminal: | pluggable terminal blocks 2.5 mm² |
Separation of the contact: | YES |
Number of channels: | 1 Channel |
Delay of operation: | 0,1 ÷ 0,2 s |
Dedicated central control inputs: | NO |
Assembly: | flush-mounted box Ø60 |
Control pulse current: | less than 1 mA |
Item weight: | 0,1500 kg |
Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl