F&F
Items 1 - 20 of 61
- SKU:
- 103045
Motion sensor is used for automatic switch on lighting in the event of a person or other object in such areas as hallways, courtyards, approach and access roads, garages, etc. Ceiling. Protection level IP 40.
- SKU:
- 102854
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102855
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
With switch off timer. Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
With switch off timer. Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102858
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102866
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102853
Electronic bistable pulse relay switch that turns on or off lights or other equipment from several different points with the parallel connected momentary (bell) control switches. The relay has two independently controlled channels.
Power supply 230 V AC. Maximum load 8 A. Dual-channel. To under plaster box Ø60. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 8 A. Dual-channel. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 103021
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 103022
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 103035
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 103037
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
- SKU:
- 103018
Two states. Two LEDs: green, red. Voltage range 5-10 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102912
Current 100 A. Voltage 230 V AC. Power AC1 38 kW. Power AC3 13 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102895
Current 25 A. Voltage 230 V AC. Power AC1 4 kW. Power AC3 1.3 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102894
Current 25 A. Voltage 24 V AC. Power AC1 4 kW. Power AC3 1.3 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102916
Current 25 A. Voltage 24 V DC. Power AC1 4 kW. Power AC3 1.3 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102903
Current 40 A. Voltage 230 V AC. Power AC1 16 kW. Power AC3 5.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102904
Current 40 A. Voltage 230 V AC. Power AC1 16 kW. Power AC3 5.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
- SKU:
- 102907
Current 40 A. Voltage 230 V AC. Power AC1 16 kW. Power AC3 5.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Items 1 - 20 of 61