Functioning
The receiver is followed by current pulse triggered by pressing any (bell) connected to the relay. Turning off the receiver will be the next pulse or automatically turn off after a preset time. Longer duration (minimum 2 seconds) pressing the relay instantaneous permanently. It will cut out after a momentary button is pressed again (or after a power failure).
Note!
BIS-410 and BIS-410i can be used with illuminated buttons.
Power table
The above data are indicative and will depend to a large extent on the design of a specific receiver (especially for LED bulbs, energy saving lamps, electronic transformers and pulse power supplies), switching frequency and working conditions.
GTIN: | 5908312598305 |
HAN: | BIS-410 |
Category: | Impulse switch relay |
supply voltage: | 230V AC |
switching current (A): | 16 A |
Contact Form: | 1 Schliesser |
operating temperatur (°C): | -25 / +50 °C |
Manufacturer series: | BIS Series - F&F |
protection category: | IP20 |
time relay functions: | 1÷15 min. |
high inrush: | no |
Functions: | ON / OFF, with time switch |
Power consumption: | 0.7W |
product type: | Bistable relay |
Cooperation with illuminated buttons: | YES |
Tightening torque: | 0.4 Nm |
Terminal: | pluggable terminal blocks 2.5 mm² |
Separation of the contact: | NO |
Number of channels: | 1 Channel |
Delay of operation: | 0,1 ÷ 0,2 s |
Status memory after power failure: | NO |
Dedicated central control inputs: | NO |
Assembly: | flush-mounted box Ø60 |
Control pulse current: | less than 5 mA |
Item weight: | 0,1500 kg |
Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl