SPST-NO (1 Form A)
Items 1 - 10 of 52
- SKU:
- 102824
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. On rail 35mm. 16A.
- SKU:
- 102825
The staircase timer AS-212 is used to automatically switch off the lighting of staircases, corridors or other objects after the set time has elapsed. Power supply 230 V AC. On rail 35 mm. 16A.
- SKU:
- 102790
Twilight switch, waterproof housing. 16A. 24V AC/DC incl. built-in sensor for switching the lighting on at dusk and off at dawn.
- SKU:
- 102836
The staircase light timer (time switch) is used to leave the lighting in hallways, stairwells or other places on for a certain time and then switch them off automatically. 230V AC 12A
- SKU:
- 102821
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. With cable connection. 10A
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102856
The BIS-412P electronic bistable pulse relay is designed for group operation. A single relay allows the controlled receiver to be switched on and off after each current pulse caused by pressing the momentary (bell) button of the local control connected to this relay.
- SKU:
- 102791
Twilight switch, IP20 16A. 24V AC/DC incl. external sensor for switching the lighting on at dusk and off at dawn.
- SKU:
- 102876
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102889
Bistable relay with timing switch and „memory” contact position.
Items 1 - 10 of 52