Installation and building technology
Items 1 - 40 of 82
- SKU:
- 103063
Detection range 30 m The DR-30M sensor is used for automatic, temporary switching of lighting when a moving person or other object is detected. It is especially recommended for use in high rooms and storage halls up to 12÷15 meters high.
- SKU:
- 102825
The staircase timer AS-212 is used to automatically switch off the lighting of staircases, corridors or other objects after the set time has elapsed. Power supply 230 V AC. On rail 35 mm. 16A.
- SKU:
- 102858
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102790
Twilight switch, waterproof housing. 16A. 24V AC/DC incl. built-in sensor for switching the lighting on at dusk and off at dawn.
- SKU:
- 102806
Direct connection 16 A. With "priority" phase.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102810
Direct connection 16 A. With "priority" phase. Maximum load 16 A (160 A / 20 ms).
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102811
For cooperation with a contactor
With priority phase
Without regulation
With priority phase
Without regulation
- SKU:
- 102812
For cooperation with a contactor
Without priority phase
Without regulation
Without priority phase
Without regulation
- SKU:
- 102813
For cooperation with a contactor
With priority phase
With regulation
With priority phase
With regulation
- SKU:
- 102814
For cooperation with contactor
Without priority phase
With regulation
Without priority phase
With regulation
- SKU:
- 102807
With "Priority" phase. For co-operation with contactors.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102808
With "Priority" phase. For co-operation with contactors. With adjustable lower (170÷210V) and upper (230÷260) actuation threshold.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102809
Automatic phase switch with 400V phase voltage output.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102856
The BIS-412P electronic bistable pulse relay is designed for group operation. A single relay allows the controlled receiver to be switched on and off after each current pulse caused by pressing the momentary (bell) button of the local control connected to this relay.
- SKU:
- 102852
Electronic bistable pulse relay switch that turns on or off lights or other equipment from several different points with the parallel connected momentary (bell) control switches.
Sequential. 4-function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Sequential. 4-function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102791
Twilight switch, IP20 16A. 24V AC/DC incl. external sensor for switching the lighting on at dusk and off at dawn.
- SKU:
- 102877
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102876
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102871
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch.
- SKU:
- 102849
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102869
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102889
Bistable relay with timing switch and „memory” contact position.
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102837
With built-in power limiter. power limit 200-1000VA , I=16A , Supply 230 V AC. On rail 35 mm.
- SKU:
- 102832
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. With anti-blocking function. 24 V AC/DC power supply. to the substrate. 16A
- SKU:
- 102835
The AS-212 staircase timer is used to automatically switch off the lighting in staircases, corridors or other objects after the set time has elapsed.
Power supply 24 V AC. On rail 35mm. 16A.
Power supply 24 V AC. On rail 35mm. 16A.
- SKU:
- 102827
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. With anti-blocking function. Supply 230 V AC. On rail 35 mm.
- SKU:
- 102833
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. With anti-lock braking function. Supply 24V AC/DC. On rail 35mm.
- SKU:
- 102824
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. On rail 35mm. 16A.
- SKU:
- 102834
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 24V AC. On rail 35 mm. 16A
- SKU:
- 102822
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. With screw terminals. 16A.
- SKU:
- 102826
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. With anti-blocking function. Supply 230V AC. to the substrate. 16A
- SKU:
- 102831
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 24V AC/DC. With screw terminals. 16A.
- SKU:
- 102788
Twilight switch, IP20 for DIN rail. 16A. 230V AC incl. external sensor for switching on the lighting at dusk and off at dawn.
- SKU:
- 102798
Twilight switch, IP20 for DIN rail. 16A. 24V AC/DC without sensor to turn on the lights at dusk and turn off the lights at dawn.
- SKU:
- 102799
delivery with hermetic probe. Twilight switch, IP20 DIN rail. 16A. 230V AC incl. external sensor for switching the lighting on at dusk and off at dawn.
- SKU:
- 102802
Especially for LED lighting, IP20 for DIN rail. 16A. 230V AC with sensor to switch the lighting on at dusk and off at dawn.
- SKU:
- 102787
Twilight switch, IP20 for DIN rail. 16A. 230V AC incl. external sensor for switching on the lighting at dusk and off at dawn.
- SKU:
- 102794
Twilight switch, IP20 16A. 24V AC/DC incl. external sensor for DIN rail for switching on the lighting at dusk and off at dawn.
Items 1 - 40 of 82