Installation and building technology
Items 1 - 50 of 325
- SKU:
- 103105
The Shelly H&T USB adapter (lower part of the housing only) for powering your Shelly H&T even without a battery.
- SKU:
- 103106
The Shelly H&T USB adapter (lower part of the housing only) for powering your Shelly H&T even without a battery.
- SKU:
- 102800
probe for twilight switch. Also Applied in sets: AZH-S, AZ-B, AZ-B UNI, AZ-112. Protection level: IP 65
- SKU:
- 102995
A single LED. Color blue. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102996
A single LED. Color blue. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102997
A single LED. Color blue. Voltage range 30-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102998
A single LED. Color blue. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102999
A single LED. Color green. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103000
A single LED. Color green. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103001
A single LED. Color green. Voltage range 10-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103002
A single LED. Color green. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103003
A single LED. Color red. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103004
A single LED. Color red. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103005
A single LED. Color red. Voltage range 30-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103006
A single LED. Color red. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103007
A single LED. Color yellow. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103008
A single LED. Color yellow. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103009
A single LED. Color yellow. Voltage range 30-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103010
A single LED. Color yellow. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103011
Three phases. Three LEDs. Color green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103012
Three phases. Three LEDs: yellow, red, green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103013
Three phases. Three LEDs. Color red.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103014
Three phases. Three LEDs. Color yellow.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103015
Two states. Two LEDs: green, red. Voltage range 10-30 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103016
Two states. Two LEDs: green, red. Voltage range 130-260 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103017
Two states. Two LEDs: green, red. Voltage range 30-130 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103018
Two states. Two LEDs: green, red. Voltage range 5-10 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102922
Auxiliary contacts / monitoring contacts 1 NO + 1 NC for installation contactor from the manufacturer F&F, max. 240V 5A for distribution box, 35mm DIN rail mounting
- SKU:
- 102923
Auxiliary contacts / monitoring contacts 2 NC for installation contactor from the manufacturer F&F, max. 240V 5A for distribution box, 35mm DIN rail mounting
- SKU:
- 102924
Auxiliary contacts / monitoring contacts 2 NO for installation contactor from the manufacturer F&F, max. 240V 5A for distribution box, 35mm DIN rail mounting
- SKU:
- 102804
Fuse module for DIN rail, 1 fuse socket for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102822
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. With screw terminals. 16A.
- SKU:
- 102824
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. On rail 35mm. 16A.
- SKU:
- 102831
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 24V AC/DC. With screw terminals. 16A.
- SKU:
- 102821
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. With cable connection. 10A
- SKU:
- 102830
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 24V AC/DC. With cable connection. 10A
- SKU:
- 102789
Applied in sets: AZH-S PLUS, AZ-B PLUS, AZ-B PLUS UNI, AZ-112 PLUS.
Available separately.
Protection level: IP 65
- SKU:
- 103110
WIFI and Bluetooth controlled controller with 4 digital inputs for extended action control
- SKU:
- 102834
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 24V AC. On rail 35 mm. 16A
- SKU:
- 103041
Motion sensor is used for automatic switch on lighting in the event of a person or other object in such areas as hallways, courtyards, approach and access roads, garages, etc. Surface mounting. Protection level IP 44.
- SKU:
- 103043
Motion sensor is used for automatic switch on lighting in the event of a person or other object in such areas as hallways, courtyards, approach and access roads, garages, etc. Surface mounting. Protection level IP 44.
- SKU:
- 103111
WIFI and Bluetooth controlled controller with 4 digital inputs for extended action control
- SKU:
- 103089
WiFi-powered light bulb with dimming function. ENERGY CLASS: F
- SKU:
- 103090
WiFi-powered light bulb with dimming function. ENERGY CLASS: F
- SKU:
- 103091
WiFi-powered light bulb white and RGBW color with dimming function. ENERGY CLASS: F
- SKU:
- 103092
WiFi-powered light bulb white and RGBW color with dimming function. ENERGY CLASS: F
- SKU:
- 103093
WiFi operated light bulb with dimming function. ENERGY CLASS A+
- SKU:
- 103095
WiFi operated light bulb with dimming function. ENERGY CLASS F
- SKU:
- 102832
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. With anti-blocking function. 24 V AC/DC power supply. to the substrate. 16A
- SKU:
- 102827
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. With anti-blocking function. Supply 230 V AC. On rail 35 mm.
Items 1 - 50 of 325