Installation and building technology
Items 1 - 20 of 45
Top
Top
- SKU:
- 102936
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Programmable logic controller CPU.
Programmable logic controller CPU.
Top
Top
- SKU:
- 102945
Three-phase, semi-indirect, bidirectional, four-quadrant electricity and network parameters measurement, compliant with the MID directive, Modbus RTU communication interface.
Top
Top
- SKU:
- 102938
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Expansion module of analog-digital inputs/outputs.
Expansion module of analog-digital inputs/outputs.
Top
Top
- SKU:
- 102935
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Programmable logic controller CPU.
Programmable logic controller CPU.
Top
Top
- SKU:
- 103023
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 103029
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 103034
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
Top
Top
- SKU:
- 103035
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 102951
Electricity consumption meter single-phase.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
Top
Top
- SKU:
- 102934
The PCZ-528.3 control timer is a universal programmable timer that combines the features of an astronomical, weekly and annual timer.
Top
Top
- SKU:
- 102930
Pulse-type. One-way type with two programme lines.
Programmable control timers are used to control the work time of devices included into industrial or household automatic systems in compliance with individual time schedule planned by the user, for example to accompany the school bells or other devices that require short turn on at specified times.
Programmable control timers are used to control the work time of devices included into industrial or household automatic systems in compliance with individual time schedule planned by the user, for example to accompany the school bells or other devices that require short turn on at specified times.
Top
Top
- SKU:
- 102929
Programmable control timer is used to time control the devices in home or industrial automation systems according to an individual time program set by the user.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
Top
Top
- SKU:
- 102983
Impulse power supply. Output voltage 24 V. Power 50 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
Top
Top
- SKU:
- 102965
Impulse power supply. Output voltage 5 V. Power 50 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
Top
Top
- SKU:
- 102920
Modular contactor with manual control
Rated operating current 40 A.
Rated operating voltage 250 V AC.
Electromagnetic contactors in modular enclosures for direct mounting on TH-35 mm rail.
Rated operating current 40 A.
Rated operating voltage 250 V AC.
Electromagnetic contactors in modular enclosures for direct mounting on TH-35 mm rail.
Top
Top
- SKU:
- 102917
Current 63 A. 24 V AC/DC voltage. Power AC1 24 kW. Power AC3 8.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Top
Top
- SKU:
- 102909
Current 63 A. 24 V AC voltage. Power AC1 24 kW. Power AC3 8.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Top
Top
- SKU:
- 102987
Output voltage 12 V. Power 60 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
Top
Top
- SKU:
- 102910
Current 63 A. Voltage 230 V AC. Power AC1 24 kW. Power AC3 8.5 kW.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Electromagnetic contactors in modular case for direct mounting on rail 35mm.
Items 1 - 20 of 45