LE-01MR v2 Electricity meter 100A 230V static RS-485 and Modbus

SKU: 102951

Electricity consumption meter single-phase.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.

LE-01MR v2 Electricity meter 100A 230V static RS-485 and Modbus

Pre-order possible
Delivery time: 12 - 14 Workdays (Other countries)

59,98 €

incl. 19% VAT , plus

Manufacturers recommended retail price: 70,00 €

Worldwide shipping

ask our friendly support Team

NEW! Intelligent article search system.

When entering the searched manufacturer series, alternative article series are displayed.

NEW! Payment by invoice

Pay after receive the goods (for German and Austrian Business Customers only).

Measured values
Active power - AE+ [kWh]                                    Active power - P[W]
Reactive energy - RE+ [kvarh]                              Reactive power - Q[var]
Phase voltage - U [V]                                           Apparent power - P[VA]
Phase current - I [A]                                            Power factor - cosφ
Frequency - F [Hz]
Meter system temperature - T [°C]

Functioning
Under the influence of flowing current and applied voltage, the LE meter accurately measures the amount of consumed electricity. Energy consumption is indicated by flashing LED (1000 pulses/kWh). In addition, the device measures the mains parameters and the temperature of its own system. The values are displayed cyclically on LCD display. Parameter changes every 3 seconds. Indicated values: active power (0.1 kWh); voltage (0.1V); current intensity (0.1A). The display is active if the meter power supply is on. If the power supply is off, user can preview the energy usage [kWh] for 30 seconds by pressing the PRESS key.
Communication with the meter working as a SLAVE is performed in accordance with Modbus RTU standard via RS-485 serial port. Converted registers values give results consistent with the indications on the meter display. Each indicator is identified by a unique address assigned by the user.

Note!
The meter has sealable input and output terminal covers to prevent any attempts to bypass the meter.

The meter is marked with individual serial number allowing its unambiguous identification. The marking is laser engraved and cannot be removed.

Service program

LE Config
The program allows to test reading of the calculated energy and make the settings of the basic parameters of the counter.

PC-LE communication via USB converter WE-1800-BT►
Free program.

Programs for remote reading of electricity meters
LE-01M, LE-01MP, LE-01MR, LE-03M, LE-03MP, LE-03M CT

MeternetPRO
The MeternetPRO application allows remote reading of states and indications of counters, multimeters, measuring transducers, expansion modules of input/output and other measuring devices communicating through Modbus RTU protocol. The exchange of data between devices and the application is executed through RS-485 or local area network (LAN). The application, along with the database is installed on a special MT-CPU-1 server, which operates in a local network. Software user interface is a web application (web site). Access to the application is executed through any web browser. In a LAN with a public IP address, you can configure the application and read the data over the Internet.

Subscription billing of electricity consumption module
Module of the subscription billing of the power consumption or other recorded incremental value, for example: water, heat, etc. It allows you to calculate the increases in the value in the designated billing periods (intervals). Cycles: monthly, weekly, daily, hourly. The module allows you to create multiple individual and parallel reports.

SKU: 102951

Pre-order possible

switching current (A):	50 A
Max. switching load:	100 A
protection category:	IP20
phase number:	1 Phase
Assembly:	DIN-Rail
product type:	Electricity meter
Terminal:	pluggable terminal blocks 25 mm² RS-485
Compatibility:	MID Directive 2014/32 / EU
Voltage:	230V AC
Dimensions:	1 module (17.5 mm)
Min. measured current:	0.02 A
Scope of indication:	0÷99999.99 kWh
accuracy class:	B
communication protocol:	MODBUS RTU
Counter constant:	(1 Wh/imp) 1000 imp/kWh
function signaling:	LED red
Item weight:	0,6000 kg

There are no reviews yet.

LE-01MR v2 Electricity meter 100A 230V static RS-485 and Modbus

Please answer the question