Installation and building technology
Items 1 - 50 of 154
- SKU:
- 101489
Single-phase indicator lamp - LED: 1 x green. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 102705
Single-phase indicator lamp - LED: 1 x RED. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 101491
Single-phase indicator lamp - LED: 1 x yellow. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 102800
probe for twilight switch. Also Applied in sets: AZH-S, AZ-B, AZ-B UNI, AZ-112. Protection level: IP 65
- SKU:
- 101492
Three phase control lamps - LED: 3 x green. Supply voltage AC - 50/60 Hz: 400/230 V. Rated power consumption - DC: = 1,1 W
- SKU:
- 101493
Three-phase control lamps - LED: 1 x green, 1 x yellow, 1 x red. Supply voltage AC - 50/60 Hz: 400/230 V. Rated power consumption - DC: = 1,1 W
- SKU:
- 101494
Three phase control lamps - LED: 3 x red. Supply voltage AC - 50/60 Hz: 400/230 V. Rated power consumption - DC: = 1,1 W
- SKU:
- 103018
Two states. Two LEDs: green, red. Voltage range 5-10 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102292
- Modular Installation relay
- Coil voltage: 12V DC
- 1 Change over contact
- Rated load: 16A
- SKU:
- 102293
- Modular Installation relay
- Coil voltage: 24V DC
- 1 Change over contact
- Rated load: 16A
- SKU:
- 102294
- Modular Installation relay
- Coil voltage: 48V DC
- 1 Change over contact
- Rated load: 16A
- SKU:
- 102922
Auxiliary contacts / monitoring contacts 1 NO + 1 NC for installation contactor from the manufacturer F&F, max. 240V 5A for distribution box, 35mm DIN rail mounting
- SKU:
- 102804
Fuse module for DIN rail, 1 fuse socket for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102822
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. With screw terminals. 16A.
- SKU:
- 102821
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. With cable connection. 10A
- SKU:
- 102291
- Modular Installation relay
- Coil voltage: 24V AC
- 1 Change over contact
- Rated load: 16A
- SKU:
- 102306
- Modular Installation relay
- Coil voltage: 12V DC
- 2 Change over contacts
- Rated load: 8A
- SKU:
- 102307
- Modular Installation relay
- Coil voltage: 24V DC
- 2 Change over contacts
- Rated load: 8A
- SKU:
- 102746
- Modular Installation relay
- Coil voltage: 230V AC
- 1 Change over contact
- Rated load: 16A
- Designed in Germany
- SKU:
- 103091
WiFi-powered light bulb white and RGBW color with dimming function. ENERGY CLASS: F
- SKU:
- 102290
- Modular Installation relay
- Coil voltage: 230V AC
- 1 Change over contact
- Rated load: 16A
- SKU:
- 102304
- Modular Installation relay
- Coil voltage: 230V AC
- 2 Change over contacts
- Rated load: 8A
- SKU:
- 102305
- Modular Installation relay
- Coil voltage: 24V AC
- 2 Change over contacta
- Rated load: 8A
- SKU:
- 102296
- Inrush Installation relay
- 24V AC/DC and 230V AC
- 1 Normally open contact
- Rated load: 16A
- inrush load max 120A - 20ms
- SKU:
- 102827
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. With anti-blocking function. Supply 230 V AC. On rail 35 mm.
- SKU:
- 102835
The AS-212 staircase timer is used to automatically switch off the lighting in staircases, corridors or other objects after the set time has elapsed.
Power supply 24 V AC. On rail 35mm. 16A.
Power supply 24 V AC. On rail 35mm. 16A.
- SKU:
- 102825
The staircase timer AS-212 is used to automatically switch off the lighting of staircases, corridors or other objects after the set time has elapsed. Power supply 230 V AC. On rail 35 mm. 16A.
- SKU:
- 102782
Twilight switch incl. sensor, serves to switch on the lighting at dusk and to switch off the above lighting at dawn.16A. IP65 housing for outdoor use
- SKU:
- 103048
Motion sensor is used for automatic switch on lighting in the event of a person or other object in such areas as hallways, courtyards, approach and access roads, garages, etc. Ceiling. Protection level IP 40.
- SKU:
- 102295
- Modular Installation relay
- UNI 12V to 240V AC/DC
- 1 Change over contact
- Rated load: 16A
- SKU:
- 102298
- Modular Installation relay
- Coil voltage: 12V AC/DC
- 1 Normally open contactt
- Rated load: 16A
- SKU:
- 102299
- Modular Installation relay
- Coil voltage: 24V AC/DC
- 1 Normally open contactt
- Rated load: 16A
- SKU:
- 102300
- Modular Installation relay
- 24V AC/DC und 230V AC
- 1 Normally open contactt
- Rated load: 16A
- SKU:
- 102847
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102312
- Modular Installation relay
- Coil voltage: 24V AC/DC
- 2 Normally open contacts
- Rated load: 8A
- SKU:
- 102308
Modular Installation relay Coil voltage: 48V DC, 1 Change over contact, Rated load: 8A
- SKU:
- 102805
Fuse module for DIN rail, 2 fuse sockets for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102748
- Modular Installation relay
- Coil voltage: 230V AC
- 2 Change over contact
- Rated load: 2x 8A
- Designed in Germany
- SKU:
- 102731
1 normally open and 1 Normally closed additional auxiliary contacts, mounted on the side of the contactor. Mounting on 35 mm rail
- SKU:
- 102311
- Modular Installation relay
- Coil voltage: 12V AC/DC
- 2 Normally open contacts
- Rated load: 8A
- SKU:
- 102752
- Modular Installation relay
- Coil voltage: 230V AC
- 3 Change over contact
- Rated load: 8A
- Designed in Germany
- SKU:
- 102858
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102785
Twilight switch, waterproof housing. 10A 230V AC incl. built-in sensor for switching on the lighting at dusk and off at dawn.
- SKU:
- 102823
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. For flush-mounted box Ø60. 10A
- SKU:
- 102838
Cascade Controller. With the sequential function of the KASKADA.
Power supply 9÷30V DC.
Power supply 9÷30V DC.
- SKU:
- 102302
- Modular Installation relay
- UNI 12V to 240V AC/DC
- 1 Normally open contact
- Rated load: 16A
- SKU:
- 102846
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 10 A. Use under plaster box Ø60.
Power supply 230 V AC. Maximum load 10 A. Use under plaster box Ø60.
- SKU:
- 102749
- Modular Installation relay
- Coil voltage: 12V AC/DC
- 2 Change over contact
- Rated load: 2x 8A
- Designed in Germany
- SKU:
- 102750
- Modular Installation relay
- Coil voltage: 24V AC/DC
- 2 Change over contact
- Rated load: 2x 8A
- Designed in Germany
- SKU:
- 102309
- Modular Installation relay
- UNI 12V to 240V AC/DC
- 2 Change over contacts
- Rated load: 8A
Items 1 - 50 of 154