Installation and building technology
Items 1 - 8 of 8
In stock
In stock
- SKU:
- 102806
Direct connection 16 A. With "priority" phase.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
In stock
In stock
- SKU:
- 102808
With "Priority" phase. For co-operation with contactors. With adjustable lower (170÷210V) and upper (230÷260) actuation threshold.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102810
Direct connection 16 A. With "priority" phase. Maximum load 16 A (160 A / 20 ms).
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102811
For cooperation with a contactor
With priority phase
Without regulation
With priority phase
Without regulation
- SKU:
- 102812
For cooperation with a contactor
Without priority phase
Without regulation
Without priority phase
Without regulation
- SKU:
- 102813
For cooperation with a contactor
With priority phase
With regulation
With priority phase
With regulation
- SKU:
- 102814
For cooperation with contactor
Without priority phase
With regulation
Without priority phase
With regulation
- SKU:
- 102809
Automatic phase switch with 400V phase voltage output.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
Items 1 - 8 of 8