F&F BIS-410-LED latching relay 230V AC 16A 1 NO contact for LED lighting

In stock

SKU: 102867

Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.

More product details

27,25 €

incl. 19% VAT plus

From

Unit price

26,16 € (Net: 21,98 €)

25,07 € (Net: 21,07 €)

7 In stock

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Product Description

Functioning
The receiver is followed by current pulse triggered by pressing any (bell) connected to the relay. Turning off the receiver will be the next pulse or automatically turn off after a preset time. Longer duration (minimum 2 seconds) pressing the relay instantaneous permanently. It will cut out after a momentary button is pressed again (or after a power failure).

Note!
BIS-410 and BIS-410i can be used with illuminated buttons.

Power table

The above data are indicative and will depend to a large extent on the design of a specific receiver (especially for LED bulbs, energy saving lamps, electronic transformers and pulse power supplies), switching frequency and working conditions.

Product Information

Dimensions and Weight
GTIN:	5908312598312
HAN:	BIS-410-LED
Category:	Impulse switch relay
supply voltage:	230V AC
switching current (A):	16 A
Contact Form:	1 Schliesser
operating temperatur (°C):	-25 / +50 °C
Manufacturer series:	BIS Series - F&F
protection category:	IP20
time relay functions:	1÷15 min.
high inrush:	120A / 20 ms
Functions:	ON / OFF, with time switch
Power consumption:	0.7W
product type:	Bistable relay
Cooperation with illuminated buttons:	YES
Tightening torque:	0.4 Nm
Terminal:	pluggable terminal blocks 2.5 mm²
Separation of the contact:	NO
Number of channels:	1 Channel
Delay of operation:	0,1 ÷ 0,2 s
Status memory after power failure:	NO
Dedicated central control inputs:	NO
Assembly:	flush-mounted box Ø60
Control pulse current:	less than 5 mA
Item weight:	0,1500 kg

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl

F&F BIS-410-LED latching relay 230V AC 16A 1 NO contact for LED lighting

Dimensions and Weight