![F&F](https://elotronics.com/media/image/manufacturer/1743/md/ff.jpg)
F&F
Items 1 - 20 of 27
- SKU:
- 102929
Programmable control timer is used to time control the devices in home or industrial automation systems according to an individual time program set by the user.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
- SKU:
- 102950
Bidirectional with RS-485 port and Modbus RTU protocole.
- SKU:
- 102959
Three-phase type. With programmable current transducer ratio.
LE-02 CT is a static (electronic) indicator calibrated electricity three-phase alternating current system.
LE-02 CT is a static (electronic) indicator calibrated electricity three-phase alternating current system.
- SKU:
- 102960
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102952
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
- SKU:
- 102963
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
- SKU:
- 102962
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
- SKU:
- 102943
Three-phase, semi-indirect, two-way, four-quadrant electricity and network parameters measurement, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102944
Three-phase, direct, two-way, four-quadrant measurement of electricity and network parameters, compliant with the MID directive, RS-485 interface and Modbus RTU communication protocol.
- SKU:
- 102955
3-phase, 2-wire, tariff to half indirect measurement.
LE-03MW CT is an electronic, 2-way electricity meter for threephase electricity, designed for measurement in a half indirect measurement.
LE-03MW CT is an electronic, 2-way electricity meter for threephase electricity, designed for measurement in a half indirect measurement.
- SKU:
- 102987
Output voltage 12 V. Power 60 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102988
Output voltage 24 V. Power 60 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102940
MID compliant. Single-phase. Current 50A.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102946
MID compliant. Three-phase energy meter. Maximum current 80A.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
- SKU:
- 102947
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
- SKU:
- 102942
Three-phase, direct, bidirectional, four-quadrant electricity and network parameters measurement, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102948
With network parameters analysis. Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03MP is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-03MP is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
- SKU:
- 102945
Three-phase, semi-indirect, bidirectional, four-quadrant electricity and network parameters measurement, compliant with the MID directive, Modbus RTU communication interface.
- SKU:
- 102949
Electric energy meter. Two tariffs. Current 100A.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
Items 1 - 20 of 27