IP20
Items 1 - 38 of 38
- SKU:
- 102808
With "Priority" phase. For co-operation with contactors. With adjustable lower (170÷210V) and upper (230÷260) actuation threshold.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102809
Automatic phase switch with 400V phase voltage output.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
- SKU:
- 102811
For cooperation with a contactor
With priority phase
Without regulation
With priority phase
Without regulation
- SKU:
- 102813
For cooperation with a contactor
With priority phase
With regulation
With priority phase
With regulation
- SKU:
- 102814
For cooperation with contactor
Without priority phase
With regulation
Without priority phase
With regulation
- SKU:
- 102807
With "Priority" phase. For co-operation with contactors.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102810
Direct connection 16 A. With "priority" phase. Maximum load 16 A (160 A / 20 ms).
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102806
Direct connection 16 A. With "priority" phase.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 103011
Three phases. Three LEDs. Color green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103012
Three phases. Three LEDs: yellow, red, green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103013
Three phases. Three LEDs. Color red.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103014
Three phases. Three LEDs. Color yellow.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103015
Two states. Two LEDs: green, red. Voltage range 10-30 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103016
Two states. Two LEDs: green, red. Voltage range 130-260 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103017
Two states. Two LEDs: green, red. Voltage range 30-130 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103018
Two states. Two LEDs: green, red. Voltage range 5-10 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 101492
Three phase control lamps - LED: 3 x green. Supply voltage AC - 50/60 Hz: 400/230 V. Rated power consumption - DC: = 1,1 W
- SKU:
- 101493
Three-phase control lamps - LED: 1 x green, 1 x yellow, 1 x red. Supply voltage AC - 50/60 Hz: 400/230 V. Rated power consumption - DC: = 1,1 W
- SKU:
- 101494
Three phase control lamps - LED: 3 x red. Supply voltage AC - 50/60 Hz: 400/230 V. Rated power consumption - DC: = 1,1 W
- SKU:
- 102995
A single LED. Color blue. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102996
A single LED. Color blue. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102997
A single LED. Color blue. Voltage range 30-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102998
A single LED. Color blue. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102999
A single LED. Color green. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103000
A single LED. Color green. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103001
A single LED. Color green. Voltage range 10-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103002
A single LED. Color green. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103003
A single LED. Color red. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103004
A single LED. Color red. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103005
A single LED. Color red. Voltage range 30-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103006
A single LED. Color red. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103007
A single LED. Color yellow. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103008
A single LED. Color yellow. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103009
A single LED. Color yellow. Voltage range 30-130 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103010
A single LED. Color yellow. Voltage range 5-10 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 101489
Single-phase indicator lamp - LED: 1 x green. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 102705
Single-phase indicator lamp - LED: 1 x RED. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 101491
Single-phase indicator lamp - LED: 1 x yellow. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
Items 1 - 38 of 38