IP20
Items 1 - 8 of 8
- SKU:
- 102948
With network parameters analysis. Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03MP is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-03MP is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
- SKU:
- 102963
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
- SKU:
- 102962
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
- SKU:
- 102953
No neutral wire.
LE-05d is a static (electronic), calibrated meter of electricity consumption, which is used as sub-meter to the indications of consumed active electricity of the three-phase alternating current in the Aron's measuring system.
LE-05d is a static (electronic), calibrated meter of electricity consumption, which is used as sub-meter to the indications of consumed active electricity of the three-phase alternating current in the Aron's measuring system.
- SKU:
- 102960
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102959
Three-phase type. With programmable current transducer ratio.
LE-02 CT is a static (electronic) indicator calibrated electricity three-phase alternating current system.
LE-02 CT is a static (electronic) indicator calibrated electricity three-phase alternating current system.
- SKU:
- 102947
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
- SKU:
- 102946
MID compliant. Three-phase energy meter. Maximum current 80A.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
Items 1 - 8 of 8