2W
Items 1 - 10 of 14
- SKU:
- 102958
Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
- SKU:
- 102950
Bidirectional with RS-485 port and Modbus RTU protocole.
- SKU:
- 102960
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102961
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102952
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
- SKU:
- 102962
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
- SKU:
- 102943
Three-phase, semi-indirect, two-way, four-quadrant electricity and network parameters measurement, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102944
Three-phase, direct, two-way, four-quadrant measurement of electricity and network parameters, compliant with the MID directive, RS-485 interface and Modbus RTU communication protocol.
Top
Top
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102946
MID compliant. Three-phase energy meter. Maximum current 80A.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
Items 1 - 10 of 14