BIS-411-LED 24 V latching relay 9V-30V AC/DC 16A 1 NO contact for LED lamps

SKU: 102860

Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.

BIS-411-LED 24 V latching relay 9V-30V AC/DC 16A 1 NO contact for LED lamps

Pre-order possible
Delivery time: 12 - 14 Workdays (Other countries)

18,56 €

incl. 19% VAT , plus

Quantity	Single price
1	18,56 €*
10	17,64 €*
20	16,71 €*

Worldwide shipping

ask our friendly support Team

NEW! Intelligent article search system.

When entering the searched manufacturer series, alternative article series are displayed.

NEW! Payment by invoice

Pay after receive the goods (for German and Austrian Business Customers only).

Functioning
The receiver is actuated by means of a current pulse triggered by pushing any bell push connected to the relay. The receiver is deactivated by another pulse or after a preset time.
The relay does not “memorize” the position of the relay contact, i.e. in case of supply voltage decay and the subsequent return of supply voltage, the relay contact will be set in the off position. Such a solution prevents the automatic actuation of the receivers controlled that might occur without proper supervision after a long-lasting decay of supply voltage.

Attention!
The BIS-411 and BIS-411i (230V versions) compatible with bell pushes equipped with fluorescent lamps.

Attention!
The BIS-411 and BIS-411i (24V versions) not compatible with bell pushes equipped with fluorescent lamps.
Power table

The above data are indicative and will depend to a large extent on the design of a specific receiver (especially for LED bulbs, energy saving lamps, electronic transformers and pulse power supplies), switching frequency and working conditions.

SKU: 102860

Pre-order possible

supply voltage:	12V DC 24V DC 9V to 30V AC/DC
switching current (A):	16 A
Contact Form:	SPST-NO (1 Form A)
operating temperatur (°C):	-25 / +50 °C
Manufacturer series:	BIS Series - F&F
protection category:	IP20
high inrush:	120A / 20 ms
Functions:	ON / OFF
Power consumption:	0.7W
Assembly:	DIN-Rail
product type:	Bistable relay
Cooperation with illuminated buttons:	NO
Tightening torque:	0.4 Nm
Terminal:	pluggable terminal blocks 2.5 mm²
Separation of the contact:	YES
Number of channels:	1 Channel
Delay of operation:	0,1 ÷ 0,2 s
Status memory after power failure:	NO
Dedicated central control inputs:	NO
Control pulse current:	less than 1 mA
Item weight:	0,1500 kg