IP20
- SKU:
- 102806
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102810
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102811
With priority phase
Without regulation
- SKU:
- 102813
With priority phase
With regulation
- SKU:
- 102814
Without priority phase
With regulation
- SKU:
- 102807
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102808
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102809
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
- SKU:
- 102788
- SKU:
- 102798
- SKU:
- 102799
- SKU:
- 102802
- SKU:
- 102787
- SKU:
- 102794
- SKU:
- 102797
- SKU:
- 102796
- SKU:
- 102795
- SKU:
- 102792
- SKU:
- 102783
- SKU:
- 102791
- SKU:
- 102793
- SKU:
- 102854
Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102857
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102855
With switch off timer. Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102867
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102858
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102847
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102860
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102888
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102892
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102890
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102891
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102862
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position.
- SKU:
- 102861
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102863
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102864
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position.
- SKU:
- 102874
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. Can be used with backlit buttons.
- SKU:
- 102878
Power supply 24 V AC. Maximum load 16 A. On rail TH-35.