ZI-5 impulse power supply 50W 15V DC for DIN rail

SKU: 102984

Impulse power supply. Output voltage 15 V. Power 50 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.

ZI-5 impulse power supply 50W 15V DC for DIN rail

•
•
•

Pre-order possible
Delivery time: 8 - 10 Workdays (Other countries)

35,50 €

excl. 19% VAT , plus

Quantity	Single price
1	35,50 €*
10	33,73 €*
20	31,95 €*

Worldwide shipping

ask our friendly support Team

NEW! Intelligent article search system.

When entering the searched manufacturer series, alternative article series are displayed.

NEW! Payment by invoice

Pay after receive the goods (for German and Austrian Business Customers only).

Implementation

Type	Output voltage	Current
ZI-1	5V DC	10A
ZI-2	12V DC	4A
ZI-3	18V DC	3A
ZI-4	24V DC	2A
ZI-5	15V DC	3,3A
ZI-6	48V DC	1A

Attention!
* Below 160V input power supply voltage will continue to stabilize the output voltage, but the maximum output current will decrease concurrent with a decline in input voltage.
* Due to the high frequency converter, some very sensitive radio or microprocessor can operate correctly. It is recommended that you install the filter OP-230 (see item 18) between the power supply and receiver.
* By increasing the load above Imax will stabilize power supply current, but output voltage will decrease. If a outputvoltage falls to about 40% of the power supply is switched off and will be 1.5 ÷ 2sec. sample. Similarly happens when you connect the receiver, which receives a large current boot (ie the cold light bulb). If you're experiencing is not too large, the power supply after a few attempts (eg, the gradual warming-up, the light bulb filaments) runs. If the load is too large to sample the power supply will disconnect the load moment.

SKU: 102984

Pre-order possible

protection category:	IP20
output power:	50 W
input voltage AC:	85÷264 V AC
Assembly:	DIN-Rail
product type:	power supply
Tightening torque:	0.4 Nm
Terminal:	pluggable terminal blocks 2.5 mm²
Switching Frequenz:	70 kHz
operating temperatur (°C):	-10 / +40 °C
continuous operating voltage max.:	110% output voltage
switching current (A):	3.3 A
Manufacturer series:	Zi Series - F&F
output voltage:	15 V DC
Dimensions:	6 modules (105 mm)
Item weight:	0,4000 kg