F&F ZI-6 impulse power supply 50W 48V DC for DIN rail

Name: F&F ZI-6 impulse power supply 50W 48V DC for DIN rail
Brand: F&F
SKU: 102985
Price: 42.25 EUR
Availability: InStock

SKU: 102985

Impulse power supply. Output voltage 48 V. Power 50 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage. More product details

42,25 €

incl. 19% VAT plus

From

Unit price

40,13 € (Net: 33,73 €)

38,02 € (Net: 31,95 €)

available to order

Delivery time: 9 - 11 Workdays (DE - int. shipments may differ)

Product Description

Implementation

Type	Output voltage	Current
ZI-1	5V DC	10A
ZI-2	12V DC	4A
ZI-3	18V DC	3A
ZI-4	24V DC	2A
ZI-5	15V DC	3,3A
ZI-6	48V DC	1A

Attention!
* Below 160V input power supply voltage will continue to stabilize the output voltage, but the maximum output current will decrease concurrent with a decline in input voltage.
* Due to the high frequency converter, some very sensitive radio or microprocessor can operate correctly. It is recommended that you install the filter OP-230 (see item 18) between the power supply and receiver.
* By increasing the load above Imax will stabilize power supply current, but output voltage will decrease. If a outputvoltage falls to about 40% of the power supply is switched off and will be 1.5 ÷ 2sec. sample. Similarly happens when you connect the receiver, which receives a large current boot (ie the cold light bulb). If you're experiencing is not too large, the power supply after a few attempts (eg, the gradual warming-up, the light bulb filaments) runs. If the load is too large to sample the power supply will disconnect the load moment.

Product Information

Dimensions and Weight
GTIN:	5908312595878
HAN:	ZI-6
Category:	Power supply
switching current (A):	1 A
operating temperatur (°C):	-10 / +40 °C
Manufacturer series:	Zi Series - F&F
protection category:	IP20
output power:	50 W
input voltage AC:	85 - 264 V/AC
Assembly:	DIN-Rail
product type:	power supply
Tightening torque:	0.4 Nm
Terminal:	pluggable terminal blocks 2.5 mm²
Switching Frequenz:	70 kHz
continuous operating voltage max.:	110% output voltage
Dimensions:	6 modules (105 mm)
output voltage:	48 V DC
Item weight:	0,2000 kg

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl

F&F ZI-6 impulse power supply 50W 48V DC for DIN rail

Dimensions and Weight