smartmeters
Items 1 - 9 of 9
- SKU:
- 102947
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
- SKU:
- 102952
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
- SKU:
- 102960
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102961
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102949
Electric energy meter. Two tariffs. Current 100A.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
- SKU:
- 102953
No neutral wire.
LE-05d is a static (electronic), calibrated meter of electricity consumption, which is used as sub-meter to the indications of consumed active electricity of the three-phase alternating current in the Aron's measuring system.
LE-05d is a static (electronic), calibrated meter of electricity consumption, which is used as sub-meter to the indications of consumed active electricity of the three-phase alternating current in the Aron's measuring system.
- SKU:
- 102963
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
- SKU:
- 102962
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
- SKU:
- 102948
With network parameters analysis. Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03MP is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-03MP is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
Items 1 - 9 of 9
Digital and static electricity meters and intermediate electricity meters for electrical installation and house and building services. For residential and commercial installation. 230V, 24V AC and DC voltage for DIN rail mounting. Choose your suitable product, or ask us. We will be glad to help you.