Installation and building technology
Items 1 - 20 of 97
Best sellers
Best sellers
- SKU:
- 102791
Twilight switch, IP20 16A. 24V AC/DC incl. external sensor for switching the lighting on at dusk and off at dawn.
- SKU:
- 102879
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
In stock
In stock
- SKU:
- 103000
A single LED. Color green. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
In stock
In stock
- SKU:
- 103057
The motion detector is used for automatic, temporary lighting attach if a person or another object appears in detector’s range in places such as hallways, courtyards, approaches and driveways, garages, etc. Microwaves motion detector. Ceiling. Protection level IP40.
- SKU:
- 103060
Plafond with built the motion detector is used for automatic, temporary lighting attach if a person or another object appears in detector’s range in places such as hallways, courtyards, approaches and driveways, garages, etc. Type of light source E27, 25 W. Glass lampshade.
- SKU:
- 103061
Plafond with built the motion detector is used for automatic, temporary lighting attach if a person or another object appears in detector’s range in places such as hallways, courtyards, approaches and driveways, garages, etc. LED 15 W. Microwaves motion detector. Ceiling.
- SKU:
- 103062
Plafond with built the motion detector is used for automatic, temporary lighting attach if a person or another object appears in detector’s range in places such as hallways, courtyards, approaches and driveways, garages, etc. LED 10 W. Microwaves motion detector. Ceiling.
- SKU:
- 103012
Three phases. Three LEDs: yellow, red, green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103013
Three phases. Three LEDs. Color red.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103014
Three phases. Three LEDs. Color yellow.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103054
The motion detector is used for automatic, temporary lighting attach if a person or other object appears in detector's range in places such as hallways, courtyards, approaches and driveways, garages, etc. Microwave motion detector. Surface assembly. Protection level IP20.
In stock
In stock
- SKU:
- 103056
The motion detector is used for automatic, temporary lighting attach if a person or another object appears in detector’s range in places such as hallways, courtyards, approaches and driveways, garages, etc. Microwaves motion detector. Ceiling. Protection level IP40.
- SKU:
- 103059
The motion detector is used for automatic, temporary lighting attach if a person or another object appears in detector’s range in places such as hallways, courtyards, approaches and driveways, garages, etc. With presence detector function.
Best sellers
Best sellers
- SKU:
- 102825
The staircase timer AS-212 is used to automatically switch off the lighting of staircases, corridors or other objects after the set time has elapsed. Power supply 230 V AC. On rail 35 mm. 16A.
Best sellers
Best sellers
- SKU:
- 102858
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Best sellers
Best sellers
- SKU:
- 102790
Twilight switch, waterproof housing. 16A. 24V AC/DC incl. built-in sensor for switching the lighting on at dusk and off at dawn.
Best sellers
Best sellers
- SKU:
- 102821
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. With cable connection. 10A
In stock
In stock
- SKU:
- 102806
Direct connection 16 A. With "priority" phase.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102807
With "Priority" phase. For co-operation with contactors.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Best sellers
Best sellers
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
Items 1 - 20 of 97