Installation and building technology
- SKU:
- 103061
- SKU:
- 102961
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102807
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 103062
- SKU:
- 103060
- SKU:
- 102806
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 103054
- SKU:
- 103055
- SKU:
- 103056
- SKU:
- 103057
- SKU:
- 103019
Supply voltage 3 × 230 V + N.
The control lamp LK-BZ-3 is used for optical voltage signaling in individual phases of a three-phase network.
- SKU:
- 103020
- SKU:
- 103059
- SKU:
- 102890
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102886
Sequential. Power supply 24V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail.
- SKU:
- 103058
- SKU:
- 102884
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
- SKU:
- 102892
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102891
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102888
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102883
4-functioning. Sequential. Power supply 230 V AC. Maximum load 2 x 8A. Can be used with backlit buttons. The flush mounting box Ø60.
- SKU:
- 102880
Single function. Power supply 230 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102881
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
- SKU:
- 102885
Sequential. 4-function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
- SKU:
- 102867
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102876
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102889
- SKU:
- 102795
- SKU:
- 102870
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102887
Single-channel with two independent working contacts: 1 x NO and 1 x NC. Power supply 230 V AC. Maximum load 2 x 8 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102882
Single function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
- SKU:
- 102850
BIS-404 relay has two switching sections and allows for switching of two lightning circuits or others receivers from several different points and in accordance with the preselected sequence.
Power supply 230 V AC. Maximum load 2 x 8 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102875
Power supply 230 V AC. Maximum load 16 A (160A/20ms). On rail TH-35. Can be used with backlit buttons.
- SKU:
- 102851
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102879
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
- SKU:
- 102877
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102868
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102872
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch.
- SKU:
- 102869
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.