Installation and building technology
Items 1 - 30 of 65
Top
Top
- SKU:
- 102746
- Modular Installation relay
- Coil voltage: 230V AC
- 1 Change over contact
- Rated load: 16A
- Designed in Germany
Top
Top
- SKU:
- 102355
Single-function time relay, function Wu - ON for the set interval. 8 time ranges. Cadmium - free contacts 2 CO. Rated input voltage UNI 12...240VAC/DC 50/60 Hz, can also be used as lighting time switch
Top
Top
- SKU:
- 102758
Fuse module for DIN rail, 3 fuse sockets for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
Top
Top
- SKU:
- 102824
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. On rail 35mm. 16A.
Top
Top
- SKU:
- 102823
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. For flush-mounted box Ø60. 10A
Top
Top
- SKU:
- 102938
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Expansion module of analog-digital inputs/outputs.
Expansion module of analog-digital inputs/outputs.
Top
Top
- SKU:
- 102792
Twilight switch, IP20 16A. 12V AC/DC incl. external sensor for switching the lighting on at dusk and off at dawn.
Top
Top
- SKU:
- 102793
Shipping with hermetic probe. Twilight switch, IP20 wall housing. 16A. 230V AC incl. external sensor for switching the lighting on at dusk and off at dawn.
Top
Top
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
Top
Top
- SKU:
- 102856
The BIS-412P electronic bistable pulse relay is designed for group operation. A single relay allows the controlled receiver to be switched on and off after each current pulse caused by pressing the momentary (bell) button of the local control connected to this relay.
Top
Top
- SKU:
- 102849
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Top
Top
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Top
Top
- SKU:
- 102881
Electronic bi-stable pulse relays BIS-414i 24 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
Top
Top
- SKU:
- 102884
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Top
Top
- SKU:
- 102749
- Modular Installation relay
- Coil voltage: 12V AC/DC
- 2 Change over contact
- Rated load: 2x 8A
- Designed in Germany
Top
Top
- SKU:
- 102754
- Modular Installation relay
- Coil voltage: 24V AC/DC
- 3 Change over contact
- Rated load: 8A
- Designed in Germany
Top
Top
- SKU:
- 103041
Motion sensor is used for automatic switch on lighting in the event of a person or other object in such areas as hallways, courtyards, approach and access roads, garages, etc. Surface mounting. Protection level IP 44.
Top
Top
- SKU:
- 103038
The motion sensor is designed for automatic, scheduled lighting activation if a person or other object appears in places such as corridors, courtyards, approaches and driveways, garages, etc. In flush mounted Ø60.
Top
Top
- SKU:
- 103023
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 103029
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 103034
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 103035
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases. Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Top
Top
- SKU:
- 102957
Single-phase. Maximum current 45A.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
Top
Top
- SKU:
- 102940
MID compliant. Single-phase. Current 50A.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
Top
Top
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
Top
Top
- SKU:
- 102951
Electricity consumption meter single-phase.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
Top
Top
- SKU:
- 102945
Three-phase, semi-indirect, bidirectional, four-quadrant electricity and network parameters measurement, compliant with the MID directive, Modbus RTU communication interface.
Top
Top
- SKU:
- 102996
A single LED. Color blue. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
Top
Top
- SKU:
- 103011
Three phases. Three LEDs. Color green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
Top
Top
- SKU:
- 103016
Two states. Two LEDs: green, red. Voltage range 130-260 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
Items 1 - 30 of 65