F&F BIS-419-LED 230 V latching relay 230V AC 2x16A 2 NO contact LED control

SKU: 102884

GTIN: 5908312598497

HAN:BIS-419-LED

Category: Impulse switch relay

The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.

F&F BIS-419-LED 230 V latching relay 230V AC 2x16A 2 NO contact LED control

2 In stock
Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

30,35 €

incl. 19% VAT , plus

Quantity	Single price
1	30,35 €*
10	28,83 €*
20	27,31 €*

Worldwide shipping

ask our friendly support Team

NEW! Intelligent article search system.

When entering the searched manufacturer series, alternative article series are displayed.

NEW! Payment by invoice

Pay after receive the goods (for German and Austrian Business Customers only).

BIS-419i 230V is available in versions:

BIS-419 230 V - basic model with a single 16 A relay
BIS-419i 230 V - with contact adapted to work with receivers with a large starting current, such as: LED lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.

Purpose
Electronic bistable pulse relay enables switching on or off the lighting or other device from several different points by means of parallel connected, momentary (bell) control switches.
The BIS-419 relay has two switching sections and enables two circuits (branches) of lighting or other receivers to be connected according to the selected sequence from several different points.

Functioning
Power supply of the relay is signaled by the green LED. The sequential relay has two separate outputs R1 and R2. The contact status (closed / open) is forced sequentially according to the given program. Switching the contacts into the next state follows the next pulse of the control button. Switching on contact R1 and R2 is signaled by lighting of the corresponding red LEDs R1 and R2. After a power failure, the contact status is reset. After restarting the supply voltage, the relay starts operation from sequence No. 0.

Work functions

Function A

Subsequent presses of the button repeat sequence 0-3.

Function B

* Repeatedly pressing the button in less than 5 seconds, repeats sequences 1-3.
* The next pressing of the button after a time longer than 5 s, disconnects both contacts (sequence 0).
* Long press of the button - in any sequence - disconnects both contacts (sequence 0).
* After switching off both relays, pressing the button again restores the state before the shutdown (state memory). It does not apply to the case of power failure of the relay.

Function C

Subsequent presses of the button repeat sequence 0-3.

Function D

Attention!
The BIS-419i 230V is compatible with bell pushes equipped with fluorescent lamps.

SKU: 102884

2 In stock

supply voltage:	165V to 265V AC 230V AC
switching current (A):	16 A
Contact Form:	2 NO (DPST / 2 Form A)
operating temperatur (°C):	-25 / +50 °C
Manufacturer series:	BIS Series - F&F
protection category:	IP20
high inrush:	120A / 20 ms
Functions:	sequential
Power consumption:	0.9W
Assembly:	DIN-Rail
product type:	Bistable relay
Cooperation with illuminated buttons:	YES
Tightening torque:	0.4 Nm
Terminal:	pluggable terminal blocks 2.5 mm²
Separation of the contact:	YES
Number of channels:	2 channel
Delay of operation:	0,1 ÷ 0,2 s
Status memory after power failure:	NO
Dedicated central control inputs:	NO
Control pulse current:	less than 5 mA
Item weight:	0,1500 kg

Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl