Installation and building technology
Items 1 - 40 of 111
- SKU:
- 103071
Professional DIN rail intelligent dual smart controller with power measurement functions
In stock
In stock
- SKU:
- 102808
With "Priority" phase. For co-operation with contactors. With adjustable lower (170÷210V) and upper (230÷260) actuation threshold.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102809
Automatic phase switch with 400V phase voltage output.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
- SKU:
- 102811
For cooperation with a contactor
With priority phase
Without regulation
With priority phase
Without regulation
- SKU:
- 102812
For cooperation with a contactor
Without priority phase
Without regulation
Without priority phase
Without regulation
- SKU:
- 102813
For cooperation with a contactor
With priority phase
With regulation
With priority phase
With regulation
- SKU:
- 102814
For cooperation with contactor
Without priority phase
With regulation
Without priority phase
With regulation
- SKU:
- 102807
With "Priority" phase. For co-operation with contactors.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102810
Direct connection 16 A. With "priority" phase. Maximum load 16 A (160 A / 20 ms).
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Best sellers
Best sellers
- SKU:
- 103066
Professional 1-channel DIN rail smart switch with power measurement
In stock
In stock
- SKU:
- 102806
Direct connection 16 A. With "priority" phase.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
In stock
In stock
- SKU:
- 103065
Professional 1-channel DIN rail smart switch with potential-free contacts
Top
Top
- SKU:
- 102934
The PCZ-528.3 control timer is a universal programmable timer that combines the features of an astronomical, weekly and annual timer.
In stock
In stock
- SKU:
- 102931
Programmable control timer is used to time control the devices in home or industrial automation systems according to an individual time program set by the user.
Annual type. One-way type.
Annual type. One-way type.
Top
Top
- SKU:
- 102930
Pulse-type. One-way type with two programme lines.
Programmable control timers are used to control the work time of devices included into industrial or household automatic systems in compliance with individual time schedule planned by the user, for example to accompany the school bells or other devices that require short turn on at specified times.
Programmable control timers are used to control the work time of devices included into industrial or household automatic systems in compliance with individual time schedule planned by the user, for example to accompany the school bells or other devices that require short turn on at specified times.
In stock
In stock
- SKU:
- 102928
Programmable control timer is used to time control the devices in home or industrial automation systems by an individual time program set by the user.
Weekly cycles type. One-way type. 250 of memory sectors.
Weekly cycles type. One-way type. 250 of memory sectors.
In stock
In stock
- SKU:
- 103063
Detection range 30 m The DR-30M sensor is used for automatic, temporary switching of lighting when a moving person or other object is detected. It is especially recommended for use in high rooms and storage halls up to 12÷15 meters high.
In stock
In stock
- SKU:
- 103083
WiFi controlled plug 16 amp. Control a wide range of household appliances and office equipment (lighting, power lines, security systems, radiators, air conditioning, etc.) from anywhere.
In stock
In stock
- SKU:
- 102890
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102886
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 24V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail.
Sequential. Power supply 24V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail.
Top
Top
- SKU:
- 102884
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Best sellers
Best sellers
- SKU:
- 102799
delivery with hermetic probe. Twilight switch, IP20 DIN rail. 16A. 230V AC incl. external sensor for switching the lighting on at dusk and off at dawn.
In stock
In stock
- SKU:
- 102797
Incl. with hermetic probe. Twilight switch, IP20 DIN rail. 16A. 12V to 240V AC/DC incl. external sensor for switching the lighting on at dusk and off at dawn.
Top
Top
- SKU:
- 103109
Smart relay 2 channel that supports up to 10A per channel and 16A total current (18A peak).
- SKU:
- 102837
With built-in power limiter. power limit 200-1000VA , I=16A , Supply 230 V AC. On rail 35 mm.
- SKU:
- 102892
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102891
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102888
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102880
Electronic bi-stable pulse relays BIS-414i 230V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
Top
Top
- SKU:
- 102881
Electronic bi-stable pulse relays BIS-414i 24 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
- SKU:
- 102885
Electronic bistable pulse relay switch that turns on or off lights or other equipment from several different points with the parallel connected momentary (bell) control switches.
Sequential. 4-function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
Sequential. 4-function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
In stock
In stock
- SKU:
- 102852
Electronic bistable pulse relay switch that turns on or off lights or other equipment from several different points with the parallel connected momentary (bell) control switches.
Sequential. 4-function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Sequential. 4-function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102867
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102796
Twilight switch, IP20 16A. 12V to 240V AC/DC incl. external sensor for DIN rail for switching on the lighting at dusk and off at dawn.
Best sellers
Best sellers
- SKU:
- 102795
With hermetic probe IP65. Twilight switch, IP20 DIN rail. 16A. 230V AC incl. external sensor for switching the lighting on at dusk and off at dawn.
In stock
In stock
- SKU:
- 102870
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
Best sellers
Best sellers
- SKU:
- 102704
Bistable - pulse relay sequential with memory, 2 changeover contacts, universal control voltage 12 ... 240 V AC/DC. For control cabinet / distribution box. For LED and conventional lighting control.
- SKU:
- 102882
Electronic bi-stable pulse relays BIS-414 24V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
Single function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
Best sellers
Best sellers
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102875
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 230 V AC. Maximum load 16 A (160A/20ms). On rail TH-35. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A (160A/20ms). On rail TH-35. Can be used with backlit buttons.
Items 1 - 40 of 111