BIS-419-LED 24 V latching relay 9V-30V AC/DC 2x16A 2 NO contact LED control

SKU: 102886

The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 24V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail.

BIS-419-LED 24 V latching relay 9V-30V AC/DC 2x16A 2 NO contact LED control

Pre-order possible
Delivery time: 12 - 14 Workdays (Other countries)

30,58 €

incl. 19% VAT , plus

Quantity	Single price
1	30,58 €*
10	29,05 €*
20	27,52 €*

Worldwide shipping

ask our friendly support Team

NEW! Intelligent article search system.

When entering the searched manufacturer series, alternative article series are displayed.

NEW! Payment by invoice

Pay after receive the goods (for German and Austrian Business Customers only).

Electronic bistable pulse relay enables switching on or off the lighting or other device from several different points by means of parallel connected, momentary (bell) control switches.

The BIS-419 relay has two switching sections and enables two circuits (branches) of lighting or other receivers to be connected according to the selected sequence from several different points.

Functioning
Power supply of the relay is signaled by the green LED. The sequential relay has two separate outputs R1 and R2. The contact status (closed / open) is forced sequentially according to the given program. Switching the contacts into the next state follows the next pulse of the control button. Switching on contact R1 and R2 is signaled by lighting of the corresponding red LEDs R1 and R2. After a power failure, the contact status is reset. After restarting the supply voltage, the relay starts operation from sequence No. 0.

Work functions

Function A

Subsequent presses of the button repeat sequence 0-3.

Function B

* Repeatedly pressing the button in less than 5 seconds, repeats sequences 1-3.
* The next pressing of the button after a time longer than 5 s, disconnects both contacts (sequence 0).
* Long press of the button - in any sequence - disconnects both contacts (sequence 0).
* After switching off both relays, pressing the button again restores the state before the shutdown (state memory). It does not apply to the case of power failure of the relay.

Function C

Subsequent presses of the button repeat sequence 0-3.

Function D

SKU: 102886

Pre-order possible

supply voltage:	12V DC 24V DC 9V to 30V AC/DC
switching current (A):	16 A
Contact Form:	DPST-NO (2 Form A)
operating temperatur (°C):	-25 / +50 °C
Manufacturer series:	BIS Series - F&F
protection category:	IP20
high inrush:	120A / 20 ms
Functions:	sequential
Power consumption:	0.9W
Assembly:	DIN-Rail
product type:	Bistable relay
Cooperation with illuminated buttons:	YES
Tightening torque:	0.4 Nm
Terminal:	pluggable terminal blocks 2.5 mm²
Separation of the contact:	YES
Number of channels:	2 channel
Delay of operation:	0,1 ÷ 0,2 s
Status memory after power failure:	NO
Dedicated central control inputs:	NO
Control pulse current:	less than 1 mA
Item weight:	0,1500 kg