Building and safety technology
Items 1 - 20 of 40
Best sellers
Best sellers
- SKU:
- 102858
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Best sellers
Best sellers
- SKU:
- 102847
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Top
Top
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102806
Direct connection 16 A. With "priority" phase.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
In stock
In stock
- SKU:
- 102808
With "Priority" phase. For co-operation with contactors. With adjustable lower (170÷210V) and upper (230÷260) actuation threshold.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Top
Top
- SKU:
- 102849
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102868
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102870
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102809
Automatic phase switch with 400V phase voltage output.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
Top
Top
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102888
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102890
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
In stock
In stock
- SKU:
- 102879
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
Top
Top
- SKU:
- 102884
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
- SKU:
- 102811
For cooperation with a contactor
With priority phase
Without regulation
With priority phase
Without regulation
- SKU:
- 102812
For cooperation with a contactor
Without priority phase
Without regulation
Without priority phase
Without regulation
- SKU:
- 102814
For cooperation with contactor
Without priority phase
With regulation
Without priority phase
With regulation
- SKU:
- 102807
With "Priority" phase. For co-operation with contactors.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102860
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102892
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Items 1 - 20 of 40