16 A
- SKU:
- 102808
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102809
Automatic phase switch is used for maintaining the power supply continuity of the two-phase circuit in case one of the power supply phases fail or its parameters drop. Optional it may serve as a controller that allows to power the selected circuits connected to one or two phases.
- SKU:
- 102811
With priority phase
Without regulation
- SKU:
- 102812
Without priority phase
Without regulation
- SKU:
- 102813
With priority phase
With regulation
- SKU:
- 102814
Without priority phase
With regulation
- SKU:
- 102807
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102810
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102806
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102934
- SKU:
- 102931
Annual type. One-way type.
- SKU:
- 102930
Programmable control timers are used to control the work time of devices included into industrial or household automatic systems in compliance with individual time schedule planned by the user, for example to accompany the school bells or other devices that require short turn on at specified times.
- SKU:
- 102928
Weekly cycles type. One-way type. 250 of memory sectors.
- SKU:
- 102927
Weekly cycles type. One-way type. 250 of memory sectors.
- SKU:
- 103063
- SKU:
- 102890
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102886
Sequential. Power supply 24V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail.
- SKU:
- 102884
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
- SKU:
- 102799
- SKU:
- 102797
- SKU:
- 102837
- SKU:
- 102892
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102891
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102888
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102880
Single function. Power supply 230 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102881
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
- SKU:
- 102885
Sequential. 4-function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
- SKU:
- 102852
Sequential. 4-function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102867
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102876
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102889
- SKU:
- 102796
- SKU:
- 102795
- SKU:
- 102870
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102882
Single function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102875
Power supply 230 V AC. Maximum load 16 A (160A/20ms). On rail TH-35. Can be used with backlit buttons.
- SKU:
- 102851
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102879
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
- SKU:
- 102877
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102868
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102872
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch.
- SKU:
- 102869
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102855
With switch off timer. Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102793
- SKU:
- 102798
- SKU:
- 102802
- SKU:
- 102788
- SKU:
- 102862
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position.
- SKU:
- 102861
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.