Functioning
Power supply of the relay is signaled by the green LED. The sequential relay has two separate outputs R1 and R2. The contact status (closed / open) is forced sequentially according to the given program. Switching the contacts into the next state follows the next pulse of the control button. The switching of the R1 and R2 contacts is signaled by the lighting of the corresponding red LEDs R1 and R2. After a power failure, the contact status is reset. After restarting the supply voltage, the relay starts operation from sequence No. 0.
Note!
BIS-409 compatible with bell pushes equipped with fluorescend lamps. (ΣI<5mA).
Power table
The above data are indicative and will heavily depend on the design of a specific receiver (that is especially important for LED bulbs, energy-saving lamps, electronic transformers and pulse power supply units), switching frequency and operating conditions.
GTIN: | 5908312598398 |
HAN: | BIS-409 |
Category: | Impulse switch relay |
supply voltage: | 230V AC |
switching current (A): | 8 A |
Contact Form: | 2 Schliesser |
operating temperatur (°C): | -25 / +50 °C |
Manufacturer series: | BIS Series - F&F |
protection category: | IP20 |
high inrush: | no |
Functions: | sequential |
Power consumption: | 0.7W |
product type: | Bistable relay |
Cooperation with illuminated buttons: | YES |
Tightening torque: | 0.4 Nm |
Terminal: | pluggable terminal blocks 2.5 mm² |
Separation of the contact: | NO |
Number of channels: | 2 channel |
Delay of operation: | 0,1 ÷ 0,2 s |
Status memory after power failure: | NO |
Dedicated central control inputs: | NO |
Assembly: | flush-mounted box Ø60 |
Control pulse current: | less than 5 mA |
Item weight: | 0,1500 kg |
Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl