DIN-Rail
Items 1 - 30 of 44
- SKU:
- 102746
- Modular Installation relay
- Coil voltage: 230V AC
- 1 Change over contact
- Rated load: 16A
- Designed in Germany
- SKU:
- 102355
Single-function time relay, function Wu - ON for the set interval. 8 time ranges. Cadmium - free contacts 2 CO. Rated input voltage UNI 12...240VAC/DC 50/60 Hz, can also be used as lighting time switch
- SKU:
- 102758
Fuse module for DIN rail, 3 fuse sockets for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102824
The staircase timer allows the lighting in corridors, staircases and rooms to be timed. Supply 230 V AC. On rail 35mm. 16A.
- SKU:
- 102938
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Expansion module of analog-digital inputs/outputs.
Expansion module of analog-digital inputs/outputs.
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102849
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102881
Electronic bi-stable pulse relays BIS-414i 24 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
- SKU:
- 102884
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
- SKU:
- 102749
- Modular Installation relay
- Coil voltage: 12V AC/DC
- 2 Change over contact
- Rated load: 2x 8A
- Designed in Germany
- SKU:
- 102754
- Modular Installation relay
- Coil voltage: 24V AC/DC
- 3 Change over contact
- Rated load: 8A
- Designed in Germany
- SKU:
- 102957
Single-phase. Maximum current 45A.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
- SKU:
- 102940
MID compliant. Single-phase. Current 50A.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102951
Electricity consumption meter single-phase.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
- SKU:
- 102945
Three-phase, semi-indirect, bidirectional, four-quadrant electricity and network parameters measurement, compliant with the MID directive, Modbus RTU communication interface.
- SKU:
- 102996
A single LED. Color blue. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103011
Three phases. Three LEDs. Color green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103016
Two states. Two LEDs: green, red. Voltage range 130-260 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102929
Programmable control timer is used to time control the devices in home or industrial automation systems according to an individual time program set by the user.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
Weekly cycles type. Two-way type. 2x250 of program memory sector.
- SKU:
- 102930
Pulse-type. One-way type with two programme lines.
Programmable control timers are used to control the work time of devices included into industrial or household automatic systems in compliance with individual time schedule planned by the user, for example to accompany the school bells or other devices that require short turn on at specified times.
Programmable control timers are used to control the work time of devices included into industrial or household automatic systems in compliance with individual time schedule planned by the user, for example to accompany the school bells or other devices that require short turn on at specified times.
- SKU:
- 102934
The PCZ-528.3 control timer is a universal programmable timer that combines the features of an astronomical, weekly and annual timer.
- SKU:
- 102935
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Programmable logic controller CPU.
Programmable logic controller CPU.
- SKU:
- 102936
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Programmable logic controller CPU.
Programmable logic controller CPU.
- SKU:
- 101486
Installation contactor, 4-poles - 4N/O, Ith - 25 A, Coil: 24 V AC/DC. Operating temperature: -5...+55.
- SKU:
- 102290
- Modular Installation relay
- Coil voltage: 230V AC
- 1 Change over contact
- Rated load: 16A
- SKU:
- 103076
Wi-Fi energy meter with contactor control
- SKU:
- 103067
Professional 2-channel DIN rail relay switch with WiFi, LAN and Bluetooth connection
- SKU:
- 103068
Professional 2-channel relay with WLAN, LAN and Bluetooth connection.
Items 1 - 30 of 44