IP20
- SKU:
- 102758
- SKU:
- 102779
- SKU:
- 102804
- SKU:
- 102805
- SKU:
- 102858
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102846
Power supply 230 V AC. Maximum load 10 A. Use under plaster box Ø60.
- SKU:
- 102847
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102976
The ZI-20-12P power supply is designed for supplying low-voltage LED lamps.
- SKU:
- 102866
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
- SKU:
- 102854
Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102855
With switch off timer. Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102853
Power supply 230 V AC. Maximum load 8 A. Dual-channel. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 103018
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102873
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60.
- SKU:
- 102851
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 103019
Supply voltage 3 × 230 V + N.
The control lamp LK-BZ-3 is used for optical voltage signaling in individual phases of a three-phase network.
- SKU:
- 102867
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 103016
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103020
- SKU:
- 102975
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.