IP20
Items 1 - 40 of 83
- SKU:
- 102758
Fuse module for DIN rail, 3 fuse sockets for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102779
Fuse module for DIN rail, 4 fuse sockets for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102804
Fuse module for DIN rail, 1 fuse socket for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102805
Fuse module for DIN rail, 2 fuse sockets for fuse Ø5×20 mm, max 250 V AC/DC, max 6.3A ATTENTION! Fuse NOT included.
- SKU:
- 102858
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102847
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102866
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
- SKU:
- 103018
Two states. Two LEDs: green, red. Voltage range 5-10 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 103019
Three LED lights. Green color.
Supply voltage 3 × 230 V + N.
The control lamp LK-BZ-3 is used for optical voltage signaling in individual phases of a three-phase network.
Supply voltage 3 × 230 V + N.
The control lamp LK-BZ-3 is used for optical voltage signaling in individual phases of a three-phase network.
- SKU:
- 102975
Output voltage 12 V. Power 12 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102987
Output voltage 12 V. Power 60 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 103016
Two states. Two LEDs: green, red. Voltage range 130-260 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103020
Drei LED-Leuchten. Rot-Gelb-Grüne Farben. Die Kontrollleuchte LK-BZ-3 dient zur optischen Spannungssignalisierung in einzelnen Phasen eines Drehstromnetzes.
- SKU:
- 102977
Output voltage 24 V. Power 12 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102982
Impulse power supply. Output voltage 18 V. Power 50 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102849
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102868
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102870
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 103011
Three phases. Three LEDs. Color green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102888
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102890
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102879
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
- SKU:
- 102884
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
- SKU:
- 103000
A single LED. Color green. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102935
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Programmable logic controller CPU.
Programmable logic controller CPU.
- SKU:
- 102936
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Programmable logic controller CPU.
Programmable logic controller CPU.
- SKU:
- 102971
Output voltage 15 V. Power 12 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102984
Impulse power supply. Output voltage 15 V. Power 50 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage.
- SKU:
- 102938
FLC is a universal, programmable logic controller, which can control the elements of domestic and industrial electrical installation (for example lighting control, roller blind control, watering the garden, control of simple machines).
Expansion module of analog-digital inputs/outputs.
Expansion module of analog-digital inputs/outputs.
- SKU:
- 102887
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Single-channel with two independent working contacts: 1 x NO and 1 x NC. Power supply 230 V AC. Maximum load 2 x 8 A. On TH-35 mm rail. Can be used with backlit buttons.
Single-channel with two independent working contacts: 1 x NO and 1 x NC. Power supply 230 V AC. Maximum load 2 x 8 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102865
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102860
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102892
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102891
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102862
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position.
- SKU:
- 102861
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102863
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102864
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position.
Items 1 - 40 of 83