F&F ZI-24 impulse power supply 30W 24V DC for DIN rail

Name: F&F ZI-24 impulse power supply 30W 24V DC for DIN rail
Brand: F&F
SKU: 102979
Price: 37.19 EUR
Availability: InStock

SKU: 102979

Output voltage 24 V. Power 30 W.
The switched-mode power supply is used to supply electric and electronic devices that require a stable, filtered supply voltage independent of changes in the mains voltage. More product details

37,19 €

incl. 19% VAT plus

From

Unit price

35,33 € (Net: 29,69 €)

33,47 € (Net: 28,13 €)

available to order

Delivery time: 9 - 11 Workdays (DE - int. shipments may differ)

Product Description

Implementation

Type	Output voltage	Output current
ZI-22	12V DC	2,5A
ZI-24	24V DC	1,25A

Attention!
* Below 160V input power supply voltage will continue to stabilize the output voltage, but the maximum output current will decrease concurrent with a decline in input voltage.
* Due to the high frequency converter, some very sensitive radio or microprocessor can operate correctly. It is recommended that you install the filter OP-230 (see item 18) between the power supply and receiver.
* By increasing the load above Imax will stabilize power supply current, but output voltage will decrease. If a outputvoltage falls to about 40% of the power supply is switched off and will be 1.5 ÷ 2sec. sample. Similarly happens when you connect the receiver, which receives a large current boot (ie the cold light bulb). If you're experiencing is not too large, the power supply after a few attempts (eg, the gradual warming-up, the light bulb filaments) runs. If the load is too large to sample the power supply will disconnect the load moment.

Product Information

Dimensions and Weight
GTIN:	5908312592297
HAN:	ZI-24
Category:	Power supply
switching current (A):	1.25 A
operating temperatur (°C):	+10 / +40 °C
Manufacturer series:	Zi Series - F&F
protection category:	IP20
output voltage:	24 V DC
output power:	30 W
input voltage AC:	100 - 264 V/AC
Assembly:	DIN-Rail
product type:	power supply
Tightening torque:	0.5 Nm
Terminal:	pluggable terminal blocks 4.0 mm²
Switching Frequenz:	132 kHz
Dimensions:	3 modules (52.5 mm)
continuous operating voltage max.:	125% output voltage
Item weight:	0,2000 kg

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
F&F Filipowski Sp.k., Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl
Responsible person according to GPSR
F&F, Sikorskiego 15, 95-200 Pabianice, Polen, biuro@fif.com.pl, https://www.fif.com.pl

F&F ZI-24 impulse power supply 30W 24V DC for DIN rail

Dimensions and Weight