Installation and building technology
Items 1 - 20 of 20
- SKU:
- 100710
Monitoring relays, MR-EU1W1P - AC and DC voltage monitoring in 1-phase network, with adjustable thresholds. 1 CO ( SPDT), monitoring voltage, Operating temperature °C -25…+55, mounting on 35 mm rail
- SKU:
- 102705
Single-phase indicator lamp - LED: 1 x RED. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 101489
Single-phase indicator lamp - LED: 1 x green. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 102690
Multifunctions monitoring relay, AC current monitoring in 1-phase network, measuring range 16A, Overload capacity 20A, with adjustable thresholds; 1 CO; 230V AC
- SKU:
- 101491
Single-phase indicator lamp - LED: 1 x yellow. Supply voltage AC / DC - AC: 50/60 Hz: 130 ... 260 V. Rated power consumption - DC: = 0.7 W
- SKU:
- 102940
MID compliant. Single-phase. Current 50A.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
- SKU:
- 100711
Monitoring relays, Class III, AC Voltage monitoring in 3-phase and 1-phase network, with adjustable thresholds . 1 CO ( SPDT), monitoring voltage, Operating temperature °C -25…+55, mounting on 35 mm rail
- SKU:
- 102685
Multifunctions monitoring relay, AC current monitoring in 1-phase network, with adjustable thresholds; measuring range 0.5A, Overload capacity 2A, 1 CO; 230V AC
- SKU:
- 102689
Multifunctions monitoring relay, AC current monitoring in 1-phase network, measuring range 8A, Overload capacity 11A, with adjustable thresholds; 1 CO; 230V AC
- SKU:
- 100708
Multifunctions monitoring relays MR-EI1W1P - AC current monitoring in 1-phase network, with adjustable thresholds and adjustable hysteresis. 1 CO ( SPDT), 230V AC , Operating temperature °C -25…+55, mounting on 35 mm rail
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102686
Multifunctions monitoring relay, AC current monitoring in 1-phase network, measuring range 1A, Overload capacity 4A, with adjustable thresholds; 1 CO; 230V AC
- SKU:
- 102957
Single-phase. Maximum current 45A.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
- SKU:
- 102958
Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
- SKU:
- 102950
Bidirectional with RS-485 port and Modbus RTU protocole.
- SKU:
- 102951
Electricity consumption meter single-phase.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
- SKU:
- 102956
1-phase, 2-wire, tariff, MID compliance
LE-01MW is an electronic, compliant with the MID Directive, single-phase electricity meter, designed for measurement in a 2-wire direct system.
LE-01MW is an electronic, compliant with the MID Directive, single-phase electricity meter, designed for measurement in a 2-wire direct system.
- SKU:
- 100713
Multifunction Monitoring relays, MR-GI1M2P-TR2 - AC and DC current monitoring in 1-phase network, with adjustable thresholds. 2 CO ( DPDT), 12...400V AC, Operating temperature °C -25…+55, mounting on 35 mm rail
- SKU:
- 102687
Multifunctions monitoring relay, AC current monitoring in 1-phase network, measuring range 2A, Overload capacity 8A, with adjustable thresholds; 1 CO; 230V AC
- SKU:
- 102688
Multifunctions monitoring relay, AC current monitoring in 1-phase network, measuring range 5A, Overload capacity 6.5A, with adjustable thresholds; 1 CO; 230V AC
Items 1 - 20 of 20