LE-03d electricity meter 3x230V to 400V 100A 3-phase

SKU: 102952

Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.

LE-03d electricity meter 3x230V to 400V 100A 3-phase

Pre-order possible
Delivery time: 12 - 14 Workdays (Other countries)

89,96 €

incl. 19% VAT , plus

Manufacturers recommended retail price: 105,00 €

Worldwide shipping

ask our friendly support Team

NEW! Intelligent article search system.

When entering the searched manufacturer series, alternative article series are displayed.

NEW! Payment by invoice

Pay after receive the goods (for German and Austrian Business Customers only).

Compliance
MID Directive 2004/22/EC
EN 50470-1/3

Functioning
A special electronic system under the influence of flowing current and applied voltage in each phase generates pulses proportional to the energy drawn in the respective phase. Energy consumption in the phase is indicated by a flashing of corresponding LED (A, B, C). The sum of the three phase pulses is indicated by a flashing LED and converted into energy absorbed throughout the three-phase system. Its value is displayed by the segment LCD display. The fractional digit represent the decimal (.1 kWh = 100Wh).

Attention!
The meter is equipped with pulse output SO+ - SO-. This allows you to connect another pulse device (SO) that reads pulses generated by the meter.
No additional connected equipment is required for proper operation of the meter.

*) Base current - determines the current value at which the percentage measurement error is close to zero. If the current flowing through the meter is higher than the base current value, then the measurement error is negative, which works to the benefit of the electricity payer. On the other hand, if the current flowing through the meter is lower than the base current value, the percentage measurement error is positive and that acts against the electricity payer. These statements arise from metrological characteristics (percentage measurement error as a function of current), supplied to the user manual of a electricity meter. It is obvious that the meter measures electricity correctly with the meter accuracy class in the whole measurement range.

Maximum current - the maximum current for permanent load of the electricity meter.
Minimum current - the lowest value of the load current, which the meter detects and record.
Marking on the device: 0.25÷10(100)A - position 1 (before the parenthesis): base current of 0.25÷10A; position 2 (in parentheses): maximum current 100A.

SKU: 102952

Pre-order possible

switching current (A):	0,25÷10 A
operating temperatur (°C):	-20 / +50 °C
Max. switching load:	100 A
protection category:	IP20
phase number:	3 Phase
Power consumption:	2W
Assembly:	DIN-Rail
product type:	Electricity meter
Terminal:	pluggable terminal blocks 25 mm²
Compatibility:	MID Directive 2014/32 / EU
Voltage:	3×400 V+N
Connection current SO + SO-:	max. 27 mA
Connection voltage SO + SO-:	12÷27 V DC
Dimensions:	7 modules (122 mm)
communication protocol:	NONE
Scope of indication:	0÷99999.99 kWh
Pulse output SO + SO-:	open collector
accuracy class:	B
Min. measured current:	0.04 A
Counter constant:	(1 Wh/imp) 1000 imp/kWh
function signaling:	LED red 3× LED red
Pulse time SO + SO-:	34÷80 ms
Item weight:	0,6000 kg

There are no reviews yet.

LE-03d electricity meter 3x230V to 400V 100A 3-phase

Please answer the question