Installation and building technology
Items 1 - 13 of 13
- SKU:
- 102957
Single-phase. Maximum current 45A.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
- SKU:
- 102940
MID compliant. Single-phase. Current 50A.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
- SKU:
- 102958
Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102950
Bidirectional with RS-485 port and Modbus RTU protocole.
- SKU:
- 102951
Electricity consumption meter single-phase.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
- SKU:
- 102956
1-phase, 2-wire, tariff, MID compliance
LE-01MW is an electronic, compliant with the MID Directive, single-phase electricity meter, designed for measurement in a 2-wire direct system.
LE-01MW is an electronic, compliant with the MID Directive, single-phase electricity meter, designed for measurement in a 2-wire direct system.
- SKU:
- 103076
Wi-Fi energy meter with contactor control
- SKU:
- 103065
Professional 1-channel DIN rail smart switch with potential-free contacts
- SKU:
- 103066
Professional 1-channel DIN rail smart switch with power measurement
- SKU:
- 103068
Professional 2-channel relay with WLAN, LAN and Bluetooth connection.
- SKU:
- 103070
Professional 4-channel relay with WiFi, LAN and Bluetooth connection
- SKU:
- 103071
Professional DIN rail intelligent dual smart controller with power measurement functions
Items 1 - 13 of 13