pluggable terminal blocks 2.5 mm²
- SKU:
- 102995
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102996
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102997
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102998
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102999
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103000
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103001
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103002
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103003
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103004
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103005
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103006
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103007
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103008
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103009
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103010
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 103011
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103012
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103013
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103014
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103015
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103016
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103017
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103018
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102847
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102858
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102846
Power supply 230 V AC. Maximum load 10 A. Use under plaster box Ø60.
- SKU:
- 102860
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102854
Power supply 230 V AC. Maximum load 16 A. To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102857
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102866
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
- SKU:
- 102849
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102874
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. Can be used with backlit buttons.
- SKU:
- 102878
Power supply 24 V AC. Maximum load 16 A. On rail TH-35.
- SKU:
- 102856
- SKU:
- 102865
Power supply 230 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102863
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102864
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position.
- SKU:
- 102862
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position.