Installation and building technology
Items 1 - 20 of 28
Top
Top
- SKU:
- 102940
MID compliant. Single-phase. Current 50A.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
LE-01d is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system.
Top
Top
- SKU:
- 103076
Wi-Fi energy meter with contactor control
- SKU:
- 103073
Next generation 3-phase power consumption meter
Top
Top
- SKU:
- 102941
Single-phase, two-way, four-quadrant electrical energy measurement and network parameters, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102947
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
In stock
In stock
- SKU:
- 102942
Three-phase, direct, bidirectional, four-quadrant electricity and network parameters measurement, compliant with the MID directive, M-Bus communication interface.
- SKU:
- 102954
3-phase, 2-wire, tariff to direct measurement.
LE-03MW is an electronic, compliant with the MID Directive, 2-way electricity meter for three-phase electricity, designed for measurement in a direct system.
LE-03MW is an electronic, compliant with the MID Directive, 2-way electricity meter for three-phase electricity, designed for measurement in a direct system.
- SKU:
- 102949
Electric energy meter. Two tariffs. Current 100A.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
- SKU:
- 103074
three-phase energy meter for DIN rail mounting
Top
Top
- SKU:
- 102957
Single-phase. Maximum current 45A.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
LE-01 is static (electronic) a calibrated indication of the electricity consumption of single-phase alternating current system directly.
- SKU:
- 102958
Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
- SKU:
- 102950
Bidirectional with RS-485 port and Modbus RTU protocole.
Top
Top
- SKU:
- 102951
Electricity consumption meter single-phase.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
LE-01MR is a static (electronic) calibrated electricity meter of single-phase alternating current in a direct system. It is used for reading and recording of consumed electric energy and mains parameters with remote readout via a wired RS-485 network.
- SKU:
- 102956
1-phase, 2-wire, tariff, MID compliance
LE-01MW is an electronic, compliant with the MID Directive, single-phase electricity meter, designed for measurement in a 2-wire direct system.
LE-01MW is an electronic, compliant with the MID Directive, single-phase electricity meter, designed for measurement in a 2-wire direct system.
- SKU:
- 102959
Three-phase type. With programmable current transducer ratio.
LE-02 CT is a static (electronic) indicator calibrated electricity three-phase alternating current system.
LE-02 CT is a static (electronic) indicator calibrated electricity three-phase alternating current system.
- SKU:
- 102946
MID compliant. Three-phase energy meter. Maximum current 80A.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
LE-02d is a static (electronic) indicator calibrated electricity three-phase alternating current in the system directly.
- SKU:
- 102960
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102961
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102952
Three-phase energy meter. Maximum current 100A.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
LE-03d is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system.
- SKU:
- 102963
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
LE-03M CT is a static (electronic) rated energy which is to serve as an auxiliary meters to measure energy consumption in a three phase half direct system.
Items 1 - 20 of 28