Installation and building technology
Items 1 - 50 of 64
- SKU:
- 102961
Three-phase energy meter. To co-operation with a current transformers. Maximum current 100A.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
LE-03 CT meters are intended for current transformers with a secondary current of 5A. Maximum measured current of the system is specified by the value of the primary current while using the current transformer.
- SKU:
- 102807
With "Priority" phase. For co-operation with contactors.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 102806
Direct connection 16 A. With "priority" phase.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
Automatic phase switches serve to maintain continuity of power supply to single-phase receivers in the event of power phase decay or a drop in its parameters below standard values.
- SKU:
- 103019
Three LED lights. Green color.
Supply voltage 3 × 230 V + N.
The control lamp LK-BZ-3 is used for optical voltage signaling in individual phases of a three-phase network.
Supply voltage 3 × 230 V + N.
The control lamp LK-BZ-3 is used for optical voltage signaling in individual phases of a three-phase network.
- SKU:
- 103020
Drei LED-Leuchten. Rot-Gelb-Grüne Farben. Die Kontrollleuchte LK-BZ-3 dient zur optischen Spannungssignalisierung in einzelnen Phasen eines Drehstromnetzes.
- SKU:
- 102890
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102886
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 24V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail.
Sequential. Power supply 24V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail.
- SKU:
- 102884
The electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
Sequential. Power supply 230 V AC . Maximum load 2 x 16 A (160 A / 20 ms). On the 35 mm rail. Can be used with backlit buttons.
- SKU:
- 102892
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102891
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102888
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102880
Electronic bi-stable pulse relays BIS-414i 230V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102881
Electronic bi-stable pulse relays BIS-414i 24 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
Single function. Power supply 24 V AC. Maximum load 2 x 16 A (160 A/20 ms). On TH-35 mm rail.
- SKU:
- 102885
Electronic bistable pulse relay switch that turns on or off lights or other equipment from several different points with the parallel connected momentary (bell) control switches.
Sequential. 4-function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
Sequential. 4-function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
- SKU:
- 102795
With hermetic probe IP65. Twilight switch, IP20 DIN rail. 16A. 230V AC incl. external sensor for switching the lighting on at dusk and off at dawn.
- SKU:
- 102870
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102882
Electronic bi-stable pulse relays BIS-414 24V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
Single function. Power supply 24 V AC. Maximum load 2 x16 A. On TH-35 mm rail.
- SKU:
- 102875
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 230 V AC. Maximum load 16 A (160A/20ms). On rail TH-35. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A (160A/20ms). On rail TH-35. Can be used with backlit buttons.
- SKU:
- 102851
Electronic bi-stable pulse relays BIS-414 230 V enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
Single function. Power supply 230 V AC. Maximum load 2 x16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102879
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
Power supply 24 V AC. Maximum load 16 A (160A/20ms). On rail TH-35.
- SKU:
- 102868
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102872
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With timing switch.
- SKU:
- 102798
Twilight switch, IP20 for DIN rail. 16A. 24V AC/DC without sensor to turn on the lights at dusk and turn off the lights at dawn.
- SKU:
- 102802
Especially for LED lighting, IP20 for DIN rail. 16A. 230V AC with sensor to switch the lighting on at dusk and off at dawn.
- SKU:
- 102862
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position.
- SKU:
- 102861
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102864
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position.
- SKU:
- 102863
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. With the memory of the contact position. Can be used with backlit buttons.
- SKU:
- 102865
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102794
Twilight switch, IP20 16A. 24V AC/DC incl. external sensor for DIN rail for switching on the lighting at dusk and off at dawn.
- SKU:
- 102874
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On rail TH-35. Can be used with backlit buttons.
- SKU:
- 102878
BIS-412 electronic bi-stable pulse relay is designed for operation in a group configuration.
Power supply 24 V AC. Maximum load 16 A. On rail TH-35.
Power supply 24 V AC. Maximum load 16 A. On rail TH-35.
- SKU:
- 102787
Twilight switch, IP20 for DIN rail. 16A. 230V AC incl. external sensor for switching on the lighting at dusk and off at dawn.
- SKU:
- 102866
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. 2×NO contacts. On TH-35 mm rail.
- SKU:
- 102849
Electronic bi-stable pulse relays enables the user to actuate lighting or other devices from various locations by means of control buttons in parallel connection.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. With timing switch. Can be used with backlit buttons.
- SKU:
- 102859
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102860
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
Power supply 24V AC. Maximum load 16 A (160 A/20 ms). On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102858
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
Power supply 24 V AC. Maximum load 16 A. On TH-35 mm rail.
- SKU:
- 102847
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
Power supply 230 V AC. Maximum load 16 A. On TH-35 mm rail. Can be used with backlit buttons.
- SKU:
- 102825
The staircase timer AS-212 is used to automatically switch off the lighting of staircases, corridors or other objects after the set time has elapsed. Power supply 230 V AC. On rail 35 mm. 16A.
- SKU:
- 103011
Three phases. Three LEDs. Color green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103012
Three phases. Three LEDs: yellow, red, green.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103013
Three phases. Three LEDs. Color red.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103014
Three phases. Three LEDs. Color yellow.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
The light signal LK-713 is used for optical signals the presence of voltage in the phases of three-phase network.
- SKU:
- 103015
Two states. Two LEDs: green, red. Voltage range 10-30 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103016
Two states. Two LEDs: green, red. Voltage range 130-260 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103017
Two states. Two LEDs: green, red. Voltage range 30-130 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 103018
Two states. Two LEDs: green, red. Voltage range 5-10 V AC/DC.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
The signal light LK-714 is used for optical signaling circuits or states listed receivers, such as closed - open; work - break, etc.
- SKU:
- 102995
A single LED. Color blue. Voltage range 10-30 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
- SKU:
- 102996
A single LED. Color blue. Voltage range 130-260 V AC/DC.
Designed to optically signal the presence of voltage in a electrical circuit.
Designed to optically signal the presence of voltage in a electrical circuit.
Items 1 - 50 of 64